Simultaneously improve the mode II interlaminar fracture toughness, flexural properties, and impact strength of CFRP composites with short aramid fiber interlaminar toughening
Authors:
- 19 September 2022
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 43 (11) , 8437-8442
Abstract
This work mainly focuses on the mode II interlaminar fracture behavior of carbon fiber composite that was interlaminar toughened by short aramid fiber modified epoxy resin. The short fibers were first dispersed in the epoxy matrix and then in the laminate interlayer area during the lamination process. The ENF test evaluated the Mode II interlaminar fracture toughness of laminates. The results show that mode II interlaminar fracture toughness increases with the addition of short fibers. When the fiber content is 10 g/m2, the toughening effect is the best at 2437.72 J/m2, which is about 61.8% higher than the untoughened sample. The toughening mechanism of CFRP laminates by adding short fibers was observed by mode II fracture surface SEM images. In addition, flexural properties and Charpy impact properties of short fiber modified resin interlayer toughened laminates were also studied. The results showed that with this method, flexural properties and impact strength were improved to a certain extent, proving that this method is an effective interlaminar toughening method.Keywords
Funding Information
- Natural Science Foundation of Zhejiang Province (LGG21E050025)
This publication has 29 references indexed in Scilit:
- Low-velocity impact damage research on CFRPs with Kevlar-fiber tougheningComposite Structures, 2019
- Preparation, development, outcomes, and application versatility of carbon fiber-based polymer composites: a reviewAdvanced Composites and Hybrid Materials, 2019
- Effect of polyamide-6,6 (PA 66) nonwoven veils on the mechanical performance of carbon fiber/epoxy compositesComposite Structures, 2018
- Enhancement of interlaminar fracture toughness of carbon fiber–epoxy composites using polyamide‐6,6 electrospun nanofibersJournal of Applied Polymer Science, 2017
- Delamination toughening of carbon fiber/epoxy laminates by hierarchical carbon nanotube-short carbon fiber interleavesComposites Science and Technology, 2017
- Improving interlaminar fracture toughness of flax fiber/epoxy composites with chopped flax yarn interleavingScience China Technological Sciences, 2015
- Phase morphology of nanofibre interlayers: Critical factor for toughening carbon/epoxy compositesComposites Science and Technology, 2012
- Mode I and mode II interlaminar fracture toughness of CFRP laminates toughened by carbon nanofiber interlayerComposites Science and Technology, 2008
- Delamination behaviour of carbon fibre/epoxy composite laminates with short fibre reinforcementScripta Metallurgica et Materialia, 1994
- Mode II delamination toughness of carbon-fibre/epoxy composites with chopped Kevlar fibre reinforcementComposites Science and Technology, 1994