A predictive model for the mechanical behavior of particulate composites. Part I: Model derivation
Authors:
- 1 November 1993
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 33 (22) , 1458-1465
Abstract
A method for predicting the highly nonlinear stress‐strain behavior and dilatation induced by cavitation of highly filled particulate composites from constituent properties has been developed. The approach presented uses a variation of linear elasticity throughout and has no adjustable parameters, unlike the methods currently used, which require large numbers of fitting factors and complicated nonlinear analyses. An energy balance derived from the first law of thermodynamics calculates critical strain values at which filler particles will debond when subjected to deformation. Repeated calculations of critical strain values using re‐evaluated material properties accounting for the damage caused by debonding give very nonlinear stress‐strain and dilatation curves. Experimentally observed dependencies on particle size, filler concentration, adhesion, and matrix and filler properties are correctly predicted. The method can be generalized for any state of stress or particle shape. Comparisons of experimental data with the model results give good agreement.Keywords
This publication has 23 references indexed in Scilit:
- Principle of Strength Reinforcement in Filled RubbersRubber Chemistry and Technology, 1967
- Dilatation of granular filled elastomers under high rates of strainJournal of Applied Polymer Science, 1964
- Volume Changes and Dewetting in Glass Bead-Polyvinyl Chloride Elastomeric Composites Under Large DeformationsTransactions of the Society of Rheology, 1959
- Behavior of Highly-Filled Rubber VulcanizatesRubber Chemistry and Technology, 1957
- Effect of Stretching on the Properties of RubberRubber Chemistry and Technology, 1948
- Dilatometer Studies of Pigment-Rubber SystemsIndustrial & Engineering Chemistry, 1940
- Surface Energy Relationships between Pigment Materials and RubberIndustrial & Engineering Chemistry, 1934
- Factors Determining the Reinforcing Value of Fillers in Compounded Rubber.Industrial & Engineering Chemistry, 1924
- Volume Increase of Compounded Rubber under StrainJournal of Industrial & Engineering Chemistry, 1921
- Volume Increase of Compounded Rubber underJournal of Industrial & Engineering Chemistry, 1920