Porosity Inducing Process Parameters in Selective Laser Melted AlSi10Mg Aluminium Alloy
Authors:
- P. FerroP. Ferro
- N. RazaviNRN. Razavi
- G. SavioGSG. Savio
- 1 May 2020
- journal article
- research article
- Published by Pleiades Publishing Ltd in Physical Mesomechanics
- Vol. 23 (3) , 256-262
Abstract
Additive manufacturing techniques are known for the unrivalled geometric freedom they offer to designers. It is one of the mainstays of “metal 3D-printing”, compared to casting, which, in contrast, implies more restrictions because some shapes do not cool evenly or may need moulds or forms. Despite the possible presence of defects inside additive manufactured components, such as oxide films, pores or unmelted powder, they can be strongly reduced or controlled by process parameters optimization. That seems not true for a casting component, in which defects can vary a lot from zone to zone according to the solidification conditions. Porosity inducing process parameters in selective laser melted AlSi10Mg aluminium alloy are carefully analysed with the aim to find optimal conditions that guarantee the maximum material density and the best mechanical properties. Finally, a model is proposed that correlates the amount of pores with the alloy ultimate tensile strength.Keywords
This publication has 11 references indexed in Scilit:
- Investigation on Selective Laser Melting AlSi10Mg Cellular Lattice Strut: Molten Pool Morphology, Surface Roughness and Dimensional AccuracyMaterials, 2018
- Fatigue Behavior of Porous Ti-6Al-4V Made by Laser-Engineered Net ShapingMaterials, 2018
- Fatigue strength of notched specimens made of Ti-6Al-4V produced by Selected Laser Melting techniqueProcedia Structural Integrity, 2018
- Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser MeltingMetals, 2017
- On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical PropertiesMaterials, 2017
- Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties developmentMaterials & Design (1980-2015), 2015
- Reducing porosity in AlSi10Mg parts processed by selective laser meltingAdditive Manufacturing, 2014
- Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behaviorMaterials & Design (1980-2015), 2012
- Mechanical Properties of AlSi10Mg Produced by Selective Laser MeltingPhysics Procedia, 2012
- High Power Selective Laser Melting (HP SLM) of Aluminum PartsPhysics Procedia, 2011