Effect of the Processing and Heat Treatment Route on the Microstructure of MoS2/Polyetheretherketone Coatings Obtained by Electrophoretic Deposition
- 13 March 2019
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 166 (6) , D151-D161
Abstract
In this work, molybdenum disulfide nanosheets were electrophoretically co-deposited with PEEK 708 microparticles to fabricate composite coatings on Ti-6Al-4V titanium alloy substrates. Different dispersion media, pure ethanol and ethanol with the addition of cationic chitosan polyelectrolyte have been studied. The co-deposition mechanisms were indicated based on zeta potential measurements and investigation of the interaction between particles in the suspension using electron microscopy. The composite coatings deposited from the suspension containing a low amount of MoS2 stabilized by chitosan were homogeneous. The polymer morphology changed as a result of heat-treatment from granular in the as-deposited coating into a dense, continuous matrix in the heat treated coating. The separate MoS2 nanosheets and their packages were relatively homogeneously distributed and formed arrays that were mainly parallel to the coating surface. The coatings exhibited an amorphous structure regardless of the applied cooling rate after heating. The amorphization of the coating, slowly cooled after heating above the melting point, is due to the partial diffusion of sulfur from MoS2 to PEEK 708 and its sulfonation. The obtained results provide new knowledge regarding the co-deposition mechanisms of MoS2 and PEEK in the presence of chitosan and polymer sulfonating at elevated temperatures.Keywords
Funding Information
- Narodowe Centrum Nauki (DEC-2016/21/B/ST8/00238)
This publication has 52 references indexed in Scilit:
- Tribological and mechanical properties of amorphous and semi-crystalline PEEK/SiO2 nanocomposite coatings deposited on the plain carbon steel by electrostatic powder spray techniqueProgress in Organic Coatings, 2012
- Electrophoretic Deposition of PEEK-TiO2 Composite Coatings on Stainless SteelKey Engineering Materials, 2012
- Microstructure, micro-mechanical and tribological properties of the nc-WC/a-C nanocomposite coatings magnetron sputtered on non-hardened and oxygen hardened Ti–6Al–4V alloySurface and Coatings Technology, 2010
- Electrophoretic deposition of biomaterialsJournal of The Royal Society Interface, 2010
- Chitosan Based Polyelectrolyte Complexes as Potential Carrier Materials in Drug Delivery SystemsMarine Drugs, 2010
- Electrostatic and electrosteric stabilization of aqueous suspensions of barite nanoparticlesPowder Technology, 2009
- PEEK biomaterials in trauma, orthopedic, and spinal implantsBiomaterials, 2007
- A review on fundamentals and applications of electrophoretic deposition (EPD)Progress in Materials Science, 2007
- Titanium and its Alloys for Medical Applications2003
- A sulphonated poly(aryl ether ketone)British Polymer Journal, 1985