Thermo-Optic Phase Tuners Analysis and Design for Process Modules on a Silicon Nitride Platform
Open Access
Abstract
In this paper, we present a systematic design for manufacturing analysis for thermo-optic phase tuners, framed within the process modules available on a silicon nitride platform. Departing from an established technology platform, the heat distribution in various micro-structures was analyzed, both in steady and transient states, employing a 2D heat transfer model solved numerically. Multi-parametric simulations were performed on designs combining trenches and substrate undercut, by varying their position and dimensions. The simulation results were compared to a reference conventional fully-clad cross-section. Deep air-filled trenches are shown to reduce the power consumption up to 70%, alongside a thermal crosstalk phase shift reduction of more than one order of magnitude (0.045 rad/mm), at the expense of a slightly lower bandwidth (11.8 kHz). The design with trenches and substrate undercut lowers the power consumption up to 97%, decreases two orders of magnitude the crosstalk (0.006 rad/mm), at the cost of less than one order of magnitude in bandwidth (0.9 kHz). In the works, we selected three different heater materials (Cr/Au, Al, poly-silicon) offered by the fab and four different heater widths (2.5 to 7 m). Their combinations are related to performance, reliability and durability of the devices, strongly linked to temperature, current density, and Omegaic resistance. The different figures of merit defined, and the methodology followed, can be mimicked by future designers to take design decisions at bird’s eye.
Keywords
Funding Information
- Ministerio de Economía y Competitividad (TEC2016-80385-P SINXPECT, PID2019-110877GB-I00 BHYSINPICS)
- Generalitat Valenciana (PROMETEO/2017/103)
- H2020 Marie Sklodowska Curie Innovative Training Network (MICROCOMB (GA 812818))
This publication has 36 references indexed in Scilit:
- Controllable electrical and physical breakdown of poly-crystalline silicon nanowires by thermally assisted electromigrationScientific Reports, 2016
- A Thermally Tunable 1 × 4 Channel Wavelength Demultiplexer Designed on a Low-Loss Si3N4 Waveguide PlatformPhotonics, 2015
- Programmable photonic signal processor chip for radiofrequency applicationsOptica, 2015
- Deep Trenches for Thermal Crosstalk Reduction in InP-Based Photonic Integrated CircuitsJournal of Lightwave Technology, 2014
- An introduction to InP-based generic integration technologySemiconductor Science and Technology, 2014
- Adiabatic thermo-optic Mach–Zehnder switchOptics Letters, 2013
- Large-scale nanophotonic phased arrayNature, 2013
- Development of Micro-Heaters with Optimized Temperature Compensation Design for Gas SensorsSensors, 2011
- Reliability of freestanding polysilicon microheaters to be used as igniters in solid propellant microthrustersSensors and Actuators A: Physical, 2007
- Theoretical and Experimental Evaluation of the Effect of Adding a Heat-Bypass Structure to a Laser Diode ArrayJapanese Journal of Applied Physics, 1993