Evaluation of the performance of titanium and zirconium salts as coagulants in industrial wastewater treatment: pollutant removal, sludge production, and sludge characteristics
Open Access
- 19 April 2021
- journal article
- research article
- Published by Springer Nature in Applied Water Science
- Vol. 11 (4) , 1-10
Abstract
In this study, titanium tetrachloride (TiCl4), zirconium tetrachloride (ZrCl4), and zirconium oxychloride (ZrOCl2·8H2O) were evaluated using jar test experiments as coagulants and compared with traditional aluminum sulfate (Al2(SO4)3·18H2O) and ferric chloride (FeCl3) for industrial wastewater treatment. The effects of the initial pH of 4–10 and initial coagulant doses of 10–100 mg/L on chemical oxygen demand (COD) and total suspended solids (TSS) removal were investigated. The performances of the five coagulants were also assessed in terms of the settled sludge volume, the sludge volume index (SVI), and removal efficiencies of metals, color, and total phosphorus (TP) under optimum conditions. In addition, the contents of the residual sludge produced for all five tested coagulants under optimum conditions were determined. The results showed that the maximum removal efficiency of COD (69.33%) was achieved using 100 mg/L TiCl4 at pH 8. The maximum removal efficiency of TSS (98.32%) was achieved using 50 mg/L Al2(SO4)3·18H2O at both pH 8 and 10. The settled sludge volume and SVI generated by TiCl4 were lower than that for the other four tested coagulants. ZrCl4, ZrOCl2·8H2O, FeCl3, and Al2(SO4)3·18H2O resulted in 128.13, 92.39, 72.26, and 69.66 mL/g SVI, while that using TiCl4 was 48.84 mL/g. Ti- and Zr-based coagulants achieved better removal efficiencies of TP, Zn, and Cu than FeCl3 and Al(SO4)3·18H2O. The residual sludge from using Ti and Zr coagulants had a very high TP content. The results indicated that Ti- and Zr-based coagulants could be used as alternatives to traditional coagulants for industrial wastewater treatment.Keywords
Funding Information
- Süleyman Demirel Üniversitesi (5091-YL1-17)
This publication has 17 references indexed in Scilit:
- An effective method of wastewater treatment using titanium salt and a coagulant aid of chitosanWater and Environment Journal, 2018
- Evaluation and comparison the performance of titanium and zirconium(IV) tetrachloride in textile wastewater treatmentData in Brief, 2018
- Performance evaluation of zirconium oxychloride for reduction of hydrophobic fractions of natural organic matterSeparation and Purification Technology, 2017
- Coagulation performance and floc characteristics of polytitanium tetrachloride and titanium tetrachloride compared with ferric chloride for coal mining wastewater treatmentSeparation and Purification Technology, 2015
- Comparison of the coagulation performance of tetravalent titanium and zirconium salts with alumChemical Engineering Journal, 2014
- Comparison of coagulation performance and floc properties using a novel zirconium coagulant against traditional ferric and alum coagulantsWater Research, 2012
- Characterisation of titanium tetrachloride and titanium sulfate flocculation in wastewater treatmentWater Science & Technology, 2009
- Pretreatment of palm oil mill effluent (POME) using Moringa oleifera seeds as natural coagulantJournal of Hazardous Materials, 2007
- Preparation of Titanium Dioxide (TiO2) from Sludge Produced by Titanium Tetrachloride (TiCl4) Flocculation of WastewaterEnvironmental Science & Technology, 2007
- Breakage, Regrowth, and Fractal Nature of Natural Organic Matter FlocsEnvironmental Science & Technology, 2005