High-Resolution Structure-from-Motion for Quantitative Measurement of Leading-Edge Roughness
Open Access
Abstract
Over time, erosion of the leading edge of wind turbine blades increases the leading-edge roughness (LER). This may reduce the aerodynamic performance of the blade and hence the annual energy production of the wind turbine. As early detection is key for cost-effective maintenance, inspection methods are needed to quantify the LER of the blade. The aim of this proof-of-principle study is to determine whether high-resolution Structure-from-Motion (SfM) has the sufficient resolution and accuracy for quantitative inspection of LER. SfM provides 3D reconstruction of an object geometry using overlapping images of the object acquired with an RGB camera. Using information of the camera positions and orientations, absolute scale of the reconstruction can be achieved. Combined with a UAV platform, SfM has the potential for remote blade inspections with a reduced downtime. The tip of a decommissioned blade with an artificially enhanced erosion was used for the measurements. For validation, replica molding was used to transfer areas-of-interest to the lab for reference measurements using confocal microscopy. The SfM reconstruction resulted in a spatial resolution of 1 mm as well as a sub-mm accuracy in both the RMS surface roughness and the size of topographic features. In conclusion, high-resolution SfM demonstrated a successful quantitative reconstruction of LER.Keywords
Funding Information
- Energistyrelsen (64015-0046)
- Danish Agency for Institutions and Educational Grants (4)
This publication has 53 references indexed in Scilit:
- Effects of leading edge erosion on wind turbine blade performanceWind Energy, 2013
- ‘Structure-from-Motion’ photogrammetry: A low-cost, effective tool for geoscience applicationsGeomorphology, 2012
- Straightforward reconstruction of 3D surfaces and topography with a camera: Accuracy and geoscience applicationJournal of Geophysical Research: Earth Surface, 2012
- Multiview 3D reconstruction in geosciencesComputers & Geosciences, 2012
- Assessing the Accuracy of Georeferenced Point Clouds Produced via Multi-View Stereopsis from Unmanned Aerial Vehicle (UAV) ImageryRemote Sensing, 2012
- Replication of micro and nano surface geometriesCIRP Annals, 2011
- Close-range terrestrial digital photogrammetry and terrestrial laser scanning for discontinuity characterization on rock cutsEngineering Geology, 2009
- Interpreting interferometric height measurements using the instrument transfer function2006
- Distinctive Image Features from Scale-Invariant KeypointsInternational Journal of Computer Vision, 2004
- Accuracy of replica materials when measuring engineering surfacesInternational Journal of Machine Tools and Manufacture, 2001