Hierarchical MXene/MOF Composite Structure for pH-Responsive Corrosion Inhibition and NIR-Assisted Recovery of Corrosion Protection in Shape-Memory Epoxy Coatings

Authors:
  • JLJiacheng Li
    Jiacheng Li
  • GCGuotao Chen
    Guotao Chen
  • SLShuqiong Liu
    Shuqiong Liu
  • HYHaibin Yu
    Haibin Yu

Abstract
The penetration of corrosive media and mechanical damage can accelerate the failure of organic protective coatings. Achieving long-term barrier protection, active corrosion inhibition, and recovery of protective performance after damage remains an important challenge in the design of smart anticorrosion coatings. In this study, Ti3C2Tx was used as a two-dimensional functional platform. A hierarchical Ti3C2Tx@PDA-ZIF-8/SP (TPZS) composite was constructed through polydopamine (PDA) interfacial modification, in situ growth of zeolitic imidazolate framework-8 (ZIF-8), and loading of sodium phytate (SP), and was subsequently incorporated into a shape-memory epoxy polymer (SMEP) matrix. Structural characterization confirmed the successful construction of the hierarchical TPZS composite. ICP-OES results showed that the release of Zn-related species from TPZS was markedly enhanced under acidic conditions, whereas P-containing species exhibited higher release levels under both acidic and alkaline conditions. NIR irradiation tests further showed that TPZS retained a clear photothermal response. Potentiodynamic polarization measurements showed that TPZS decreased the corrosion current density of Q235 steel from 8.744 to 2.319 μA·cm-2, corresponding to a corrosion inhibition efficiency of 73.5%. After immersion in 3.5 wt% NaCl solution for 60 d, the TPZS/SMEP coating maintained a low-frequency impedance modulus of approximately 5.1 × 108 Ω·cm2. For scratched coatings, NIR treatment increased the charge-transfer resistance (Rct) from approximately 7.5 × 104 to 2.9 × 105 Ω·cm2 and effectively suppressed corrosion propagation under salt-spray exposure. The combined effects of the two-dimensional barrier and photothermal conversion of Ti3C2Tx, PDA-mediated interfacial regulation, the environmental responsiveness of ZIF-8, and the active corrosion inhibition provided by SP enabled TPZS/SMEP to achieve long-term protection in the intact state and NIR-assisted recovery of corrosion protection after damage. These results provide a new design approach for multi-responsive smart anticorrosion coatings.