Coupling-Matrix-Based Design of High-$Q$ Bandpass Filters Using Acoustic-Wave Lumped-Element Resonator (AWLR) Modules
- 18 November 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 63 (12) , 4319-4328
Abstract
This paper presents an original and simple coupling-matrix-based synthesis methodology for the design of a new class of bandpass filters (BPFs) that employ hybrid acoustic-wave-lumped-element resonator (AWLR) modules with improved out-of-band isolation (IS). The proposed BPFs feature quasi-elliptic-type frequency response-shaped by N poles and 2N transmission zeros (TZs) for an Nth-order transfer function, compact physical size, and high effective quality factors (Qeff) of the order of 1000. Despite the use of acoustic wave (AW) resonators, passbands exhibiting fractional bandwidths (FBWs) that are no longer limited by the electromechanical coupling coefficient (kt 2 ) of the constituent AW resonators are obtained. A coupling-matrix-based model of a multi-mode AW resonator is also reported. It facilitates the incorporation of high- and low-frequency spurious modes that are present in a realistic filter response so that they can be anticipated at the synthesis and simulation levels. For proof-of-concept validation purposes, two BPF prototypes at 418 MHz made up of commercially-available surface acoustic wave (SAW) resonators and surface mounted devices (SMD) were built and measured. They perform first- (one pole and two TZs) and second-order (two poles and four TZs) transfer functions with measured passband insertion losses (IL) between 2.4-5.4 dB, Q eff between 1600-1900, 3-dB absolute bandwidths ranging from 0.52 to 1 MHz (i.e., 1.6-3.2 times kt 2 ), and minimum IS levels between 25-46 dB.Keywords
This publication has 24 references indexed in Scilit:
- A Method for Attenuating the Spurious Responses of Aluminum Nitride Micromechanical FiltersJournal of Microelectromechanical Systems, 2014
- An 880 MHz ladder filter formed by arrays of laterally vibrating thin film Lithium Niobate resonators2014
- Multi-frequency wideband RF filters using high electromechanical coupling laterally vibrating lithium niobate MEMS resonators2013
- Design and Analysis of Lithium–Niobate-Based High Electromechanical Coupling RF-MEMS Resonators for Wideband FilteringIEEE Transactions on Microwave Theory and Techniques, 2012
- High-Electromechanical-Coupling-Coefficient Surface Acoustic Wave Resonator on Ta2O5/Al/LiNbO3 StructureJapanese Journal of Applied Physics, 2010
- Technical challenges for cognitive radio in the TV white space spectrum2009
- SAW and BAW technologies for RF filter applications: A review of the relative strengths and weaknesses2008
- P6G-2 Synthesis of Frequency Response for Wideband SAW Ladder Type FiltersIEEE International Ultrasonics Symposium, 2007
- Development of low-loss band-pass filters using SAW resonators for portable telephones2003
- A study of leaky SAW on piezoelectric substrate with high coupling factor1999