CFD Modeling of a Metal Phase Change Material Thermal Storage System for High-Temperature Heat Accumulation and Steam
Open Access
Abstract
This paper develops a novel coupled model to predict the thermal behavior of a high-temperature fast heat storage unit, integrating Power-to-Heat technology with steam generation. A phase change material (PCM) made of a ZnAl6 metal alloy is used for heat storage. Electricity is used to charge the battery, and the stored energy is used to produce superheated steam during discharge. The coupled model was based on a 3D multiphase CFD model of the heat storage unit and a 1D multiphase water boiling model implemented in Python language. The CFD model solves the transient conservation equations of mass, momentum, and energy using the enthalpy–porosity method to describe phase change, while heat transfer to water is represented by a coupled 1D boiling model. The paper also presents a preliminary design, a computational strategy, and boundary conditions for the operating modes, providing an analytical foundation for detailed engineering, production, and implementation in real-world industrial environments. The presented results confirmed the correct operation of the model and enabled the evaluation of system performance, discharge behavior, and validation of the geometric assumptions required to achieve the target steam parameters. The proposed modular design allows for system scalability, while the entire system is a response to the daily variability of electricity prices resulting from periodic reductions in demand and overproduction of electricity from renewable sources. Estimated thermal behavior of the thermal storage unit for the discharging scenario allows reaching constant output power at the level of 200 kW for 85 min. Integration with a cooling reduction station allows constant system power output to be maintained by increasing the mass flow rate as the steam parameters decrease from over 400 °C to 200 °C with a lowering state of charge.Keywords
Funding Information
- CETP, Clean Energy Transition Partnership
- European Commission (101069750)
- Narodowe Centrum Badań i Rozwoju (CETP/2022/19/ISSDEMO/2024)
This publication has 37 references indexed in Scilit:
- Recent growth and potential applications of metallic phase change materials - A reviewApplied Energy, 2025
- A comprehensive review on enhanced phase change materials (PCMs) for high-performance thermal energy storage: progress, challenges, and future perspectivesJournal of Thermal Analysis and Calorimetry, 2025
- Decarbonizing energy: Evaluating fossil fuel displacement by renewables in OECD countriesEnvironmental Science and Pollution Research, 2024
- Multi-configuration evaluation of a megajoule-scale high-temperature latent thermal energy storage test-bedApplied Thermal Engineering, 2022
- Analysis of Technology Potential of a Metal‐based Latent Heat Storage for Backup Process Steam SupplyChemie Ingenieur Technik, 2021
- Microencapsulation of Zn-Al alloy as a new phase change material for middle-high-temperature thermal energy storage applicationsApplied Energy, 2020
- Fabrication of heat storage pellets composed of microencapsulated phase change material for high-temperature applicationsApplied Energy, 2020
- Latent heat storage above 120°C for applications in the industrial process heat sector and solar power generationInternational Journal of Energy Research, 2007
- A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problemsInternational Journal of Heat and Mass Transfer, 1987
- A simple friction pressure drop correlation for two-phase flow in pipesChemical Engineering and Processing - Process Intensification, 1986