Hydrocarbon Generation Mechanism of Mixed Siliciclastic–Carbonate Shale: Implications from Semi–Closed Hydrous Pyrolysis
Open Access
Abstract
Affected by the complex mechanism of organic–inorganic interactions, the generation–retention–expulsion model of mixed siliciclastic–carbonate sediments is more complicated than that of common siliciclastic and carbonate shale deposited in lacustrine and marine environments. In this study, mixed siliciclastic–carbonate shale from Lucaogou Formation in Junggar Basin was selected for semi–closed hydrous pyrolysis experiments, and seven experiments were conducted from room temperature to 300, 325, 350, 375, 400, 450, and 500 °C, respectively. The quantities and chemical composition of oil, gases, and bitumen were comprehensively analyzed. The results show that the hydrocarbon generation stage of shale in Lucaogou Formation can be divided into kerogen cracking stage (300–350 °C), peak oil generation stage (350–400 °C), wet gas generation stage (400–450 °C), and gas secondary cracking stage (450–500 °C). The liquid hydrocarbon yield (oil + bitumen) reached the peak of 720.42 mg/g TOC at 400 °C. The saturate, aromatic, resin, and asphaltine percentages of bitumen were similar to those of crude oil collected from Lucaogou Formation, indicating that semi–closed pyrolysis could stimulate the natural hydrocarbon generation process. Lucaogou shale does not strictly follow the “sequential” reaction model of kerogen, which is described as kerogen firstly generating the intermediate products of heavy hydrocarbon compounds (NSOs) and NSOs then cracking to generate oil and gas. Indeed, the results of this study show that the generation of oil and gas was synchronous with that of NSOs and followed the “alternate pathway” mechanism during the initial pyrolysis stage. The hydrocarbon expulsion efficiency sharply increased from an average of 27% to 97% at 450 °C, meaning that the shale retained considerable amounts of oil below 450 °C. The producible oil reached the peak yield of 515.45 mg/g TOC at 400 °C and was synchronous with liquid hydrocarbons. Therefore, 400 °C is considered the most suitable temperature for fracturing technology.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities of Central South University (2022ZZTS0531, 2022WK2004)
- China Hunan Provincial Science & Technology Department (2022ZZTS0531, 2022WK2004)
This publication has 74 references indexed in Scilit:
- The structural evolution of organic matter during maturation of coals and its impact on petroleum potential and feedstock for the deep biosphereOrganic Geochemistry, 2013
- Experimental and computational studies on the average molecular structure of Chinese Huadian oil shale kerogenJournal of Molecular Structure, 2012
- Development of organic porosity in the Woodford Shale with increasing thermal maturityInternational Journal of Coal Geology, 2012
- Evolution of petrophysical properties of oil shales during high-temperature compaction tests: Implications for petroleum expulsionMarine and Petroleum Geology, 2012
- Tropical East African climate change and its relation to global climate: A record from Lake Tanganyika, Tropical East Africa, over the past 90+ kyrPalaeogeography, Palaeoclimatology, Palaeoecology, 2011
- Role of water in hydrocarbon generation from Type-I kerogen in Mahogany oil shale of the Green River FormationOrganic Geochemistry, 2011
- The effects of calcite and montmorillonite on oil cracking in confined pyrolysis experimentsOrganic Geochemistry, 2010
- Modeling of gas generation from the Barnett Shale, Fort Worth Basin, TexasAAPG Bulletin, 2007
- Organic–inorganic interactions in petroleum-producing sedimentary basinsNature, 2003
- New insights on the Green River petroleum system in the Uinta basin from hydrous-pyrolysis experiments: ReplyAAPG Bulletin, 2003