Impact of using recycled fine aggregate from demolition waste on mechanical properties of cement mortar
Open Access
- 3 September 2025
- journal article
- Published by Polish Academy of Sciences Chancellery in Archives of Civil Engineering
- p. 375
Abstract
The rapid expansion of the construction industry worldwide has led to a significant increase in resource use, hence depleting the existing reserves. Utilizing recycled aggregates might potentially reduce the use of natural raw materials in the production of concrete and mortar. This would further aid in reducing the quantity of waste thrown into the environment due to demolition procedures. This study investigated the feasibility of recycling recycled fine aggregate from construction and demolition waste. Limestone powder was utilized as a filler, together with waste from three different kinds of construction and demolition waste (concrete, clay bricks, and ceramics). Cement mortar mixtures of 1:3:0.5 and 1:4:0.5 were used to design 32 different mortar mixes (cement: fine aggregate: filler). Except for the control mixes, the following replacement ratios were tested: 0%, 20%, 40%, 60%, 80%, and 100% for construction and demolition waste as a partial replacement for natural fine aggregate. Cubes, prisms, and cylinders were all used to measure the physical and mechanical properties of the mortar. In this study, the physical properties (workability, dry density) were analyzed. In addition to investigating the mechanical properties (compressive, flexural, and splitting strength), The experimental results showed that the optimal percentage of natural fine aggregate replacing recycled aggregate from construction and demolition waste was 20%. Additionally, the research demonstrated that, due to its cementitious properties, recycled fine aggregate from concrete waste significantly outperformed the reference mixes in terms of all physical and mechanical properties.Keywords
This publication has 35 references indexed in Scilit:
- Properties and microstructure of concrete using pozzolanic materials and manufactured sand as partial replacement of fine aggregateSN Applied Sciences, 2019
- Influence of fluidity on mechanical and permeation performances of recycled aggregate mortarConstruction and Building Materials, 2019
- Influence of bonded mortar of recycled concrete aggregates on interfacial characteristics – Porosity assessment based on pore segmentation from backscattered electron image analysisConstruction and Building Materials, 2019
- Assessing the influence of construction and demolition waste materials on workability and mechanical properties of concrete using statistical analysisInnovative Infrastructure Solutions, 2019
- Use of sea-sand and seawater in concrete construction: Current status and future opportunitiesConstruction and Building Materials, 2017
- Performance of cementitious renderings and masonry mortars containing recycled aggregates from construction and demolition wastesConstruction and Building Materials, 2016
- Influence of fine recycled concrete aggregates on the properties of mortarsConstruction and Building Materials, 2015
- Properties of masonry mortars manufactured with fine recycled concrete aggregatesConstruction and Building Materials, 2014
- Effect of surface treatment methods on the properties of self-compacting concrete with recycled aggregatesConstruction and Building Materials, 2014
- Mechanical behaviour of concrete made with fine recycled concrete aggregatesCement and Concrete Composites, 2007