Thermodynamic Analysis of the Combustion Process in Hydrogen-Fueled Engines with EGR
Open Access
Abstract
This article presents a novel approach to the analysis of heat release in a hydrogen-fueled internal combustion spark-ignition engine with exhaust gas recirculation (EGR). It also discusses aspects of thermodynamic analysis common to modeling and empirical analysis. This new approach concerns a novel method of calculating the specific heat ratio (cp/cv) and takes into account the reduction in the number of moles during combustion, which is characteristic of hydrogen combustion. This reduction in the number of moles was designated as a molar contraction. This is particularly crucial when calculating the average temperature during combustion. Subsequently, the outcomes of experimental tests, including the heat-release rate, the initial combustion phase (denoted CA0-10) and the main combustion phase (CA10-90), are presented. Furthermore, the impact of exhaust gas recirculation on the combustion process in the engine is also discussed. The efficacy of the proposed measures was validated by analyzing the heat-release rate and calculating the mean combustion temperature in the engine. The application of EGR in the range 0-40% resulted in a notable prolongation of both the initial and main combustion phases, which consequently influenced the mean combustion temperature.Keywords
This publication has 27 references indexed in Scilit:
- Comparative analysis of different heat transfer models, energy and exergy analysis for hydrogen-enriched internal combustion engine under different operation conditionsApplied Thermal Engineering, 2024
- Dilution of fresh charge for reducing combustion knock in the internal combustion engine fueled with hydrogen rich gasesInternational Journal of Hydrogen Energy, 2019
- Influence of exhaust residuals on combustion phases, exhaust toxic emission and fuel consumption from a natural gas fueled spark-ignition engineEnergy Conversion and Management, 2018
- Internal combustion engine heat release calculation using single-zone and CFD 3D numerical modelsInternational Journal of Energy and Environmental Engineering, 2018
- Dual nature of hydrogen combustion knockInternational Journal of Hydrogen Energy, 2013
- Setting a best practice for determining the EGR rate in hydrogen internal combustion enginesInternational Journal of Hydrogen Energy, 2013
- Effect of specific heat ratio on heat release analysis in a spark ignition engineScientia Iranica, 2011
- Analysis of a new analytical law of heat release rate (HRR) for homogenous charge compression ignition (HCCI) combustion mode versus analytical parametersApplied Thermal Engineering, 2011
- Self-tuning gross heat release computation for internal combustion enginesControl Engineering Practice, 2009
- Temperature and air–fuel ratio dependent specific heat ratio functions for lean burned and unburned mixtureEnergy Conversion and Management, 2005