Vibration Analysis of Composite Rectangular Plates Reinforced along Curved Lines
Authors:
- 1 January 2008
- journal article
- Published by Japan Society of Mechanical Engineers in Journal of System Design and Dynamics
- Vol. 2 (1) , 76-86
Abstract
In the past few decades, composite materials composed of straight fibers and polymer matrix have gained their status as the most promising material for light-weight structures. Technical merit of the composites as tailored material also provided practical advantages in the optimum design process. Recently, it is reported that the fabrication machine has been developed to make curved fibers embedded in the matrix material. Based on such technical advancement, this paper proposes an analytical method to study vibration of composite rectangular plates reinforced along curved lines. The approach is based on the Ritz method where variable fiber direction can be accommodated. For this purpose, the fibers continuously changing their direction are formulated as the variable bending stiffness in the total potential energy. A frequency equation is derived by the Ritz minimizing process, and frequency parameters are calculated as the eigenvlaues in the eigenvalue problem. In numerical results, the accuracy of the method is presented by comparing present results with FEM results. The advantages of present plate are confirmed by comparing natural frequencies and mode shapes with those of conventional composite and isotropic plates, and the effectiveness of the new solution to the most recent problem is demonstrated.Keywords
This publication has 6 references indexed in Scilit:
- 203 Vibration Design of Fibrous Composite Plate with Optimally Distributed Short FibersThe Proceedings of the Dynamics & Design Conference, 2007
- Design of variable–stiffness laminates using lamination parametersComposites Part B: Engineering, 2006
- Layerwise optimization for the maximum fundamental frequency of laminated composite platesJournal of Sound and Vibration, 2003
- Combinations for the Free-Vibration Behaviors of Anisotropic Rectangular Plates Under General Edge ConditionsJournal of Applied Mechanics, 1999
- In-plane response of laminates with spatially varying fiber orientations - Variable stiffness conceptAIAA Journal, 1993
- Application of the Ritz method to plane elasticity problems for composite sheets with variable fibre spacingInternational Journal for Numerical Methods in Engineering, 1989