Wheel–Rail Impact at Crossings: Relating Dynamic Frictional Contact to Degradation
- 8 February 2017
- journal article
- Published by ASME International in Journal of Computational and Nonlinear Dynamics
- Vol. 12 (4) , 041016
Abstract
Irregularities in the geometry and flexibility of railway crossings cause large impact forces, leading to rapid degradation of crossings. Precise stress and strain analysis is essential for understanding the behavior of dynamic frictional contact and the related failures at crossings. In this research, the wear and plastic deformation because of wheel–rail impact at railway crossings was investigated using the finite-element (FE) method. The simulated dynamic response was verified through comparisons with in situ axle box acceleration (ABA) measurements. Our focus was on the contact solution, taking account not only of the dynamic contact force but also the adhesion–slip regions, shear traction, and microslip. The contact solution was then used to calculate the plastic deformation and frictional work. The results suggest that the normal and tangential contact forces on the wing rail and crossing nose are out-of-sync during the impact, and that the maximum values of both the plastic deformation and frictional work at the crossing nose occur during two-point contact stage rather than, as widely believed, at the moment of maximum normal contact force. These findings could contribute to the analysis of nonproportional loading in the materials and lead to a deeper understanding of the damage mechanisms. The model provides a tool for both damage analysis and structure optimization of crossings.Keywords
This publication has 35 references indexed in Scilit:
- Damage of a Hadfield steel crossing due to wheel rolling impact passagesWear, 2013
- High-speed train–track–bridge dynamic interactions – Part I: theoretical model and numerical simulationInternational Journal of Rail Transportation, 2013
- Rail vehicle passing through a turnout: analysis of different turnout designs and wheel profilesProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2012
- Using GPS with a model-based estimator to estimate critical vehicle statesVehicle System Dynamics, 2010
- Geometry and stiffness optimization for switches and crossings, and simulation of material degradationProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2010
- The Calculation of Wheel Impact Force Due to the Interaction between Vehicle and a TurnoutProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2010
- Rail rolling contact fatigue dependence on friction, predicted using fracture mechanics with a three-dimensional boundary element modelEngineering Fracture Mechanics, 2009
- Effects of train impacts on urban turnouts: Modelling and validation through measurementsJournal of Sound and Vibration, 2009
- Dynamic train–turnout interaction in an extended frequency range using a detailed model of track dynamicsJournal of Sound and Vibration, 2009
- Analysis of subsurface crack propagation under rolling contact loading in railroad wheels using FEMEngineering Fracture Mechanics, 2007