Nondestructive residual stress depth profile analysis at the inner surface of small boreholes using energy-dispersive diffraction under laboratory conditions
Open Access
- 1 February 2021
- journal article
- research article
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 54 (1) , 32-41
Abstract
Energy-dispersive diffraction under both laboratory and synchrotron conditions was applied to study the hoop stress in the near-surface region of the inner wall of boreholes with a small diameter of 2 mm. By use of different X-ray beam cross sections for the sin2ψ measurements, it is demonstrated that the borehole-to-beam-diameter ratio must be considered in the evaluation. A beam cross section which is comparable to the borehole diameter reduces the slope of the d hkl φψ–sin2ψ distributions and thus invalidates the result of stress analysis. A quantitative relationship is applied, which allows the results obtained under the above conditions to be scaled so that they reflect the actual residual stress state at the measurement position. Owing to the small diffraction angles, energy-dispersive diffraction proves to be the only suitable experimental technique that allows a nondestructive and depth-resolved analysis of the hoop stress component at the inner surface of boreholes with a large length-to-diameter ratio.Keywords
This publication has 28 references indexed in Scilit:
- EDDIDAT: a graphical user interface for the analysis of energy-dispersive diffraction dataJournal of Applied Crystallography, 2020
- Residual stresses in cold drawn ferritic rodsScripta Materialia, 2005
- X-ray residual stress measurement on mechanical components with high curvatureExperimental Mechanics, 2003
- The influence of cylindrical geometry on X-ray stress tensor analysis. II. ApplicationsJournal of Applied Crystallography, 1999
- The control of geometrical sources of error in X-ray diffraction applied to stress analysisJournal of Applied Crystallography, 1992
- X-Ray Residual Stress Measurements in Notched Test SpecimensJournal of Testing and Evaluation, 1988
- A theoretical consideration of the influence of surface profile on the measurement of stress using the X-ray diffraction methodJournal of Applied Crystallography, 1981
- The X-ray measurement of tangential stress on cylindrically curved surfacesPhilosophical Magazine A, 1978
- The X‐ray measurement of axial stress on cylindrical curved surfacesStrain, 1978
- Geometrical Factors Affecting the Contours of X-Ray Spectrometer Maxima. I. Factors Causing AsymmetryJournal of Applied Physics, 1948