Research on the Disassembly Process and Model of Waste Mobile Phone Circuit Board Components
Open Access
Abstract
Dismantling the waste printed circuit boards (WPCBs) of obsolete mobile phones is essential for resource recycling and environmental protection. An automated WPCB disassembly equipment based on the hot-vibration process was designed and applied, with optimized process conditions of a heating temperature of 250 °C and an equipment amplitude of >3.66 mm. The dismantling rate for electronic components and metal shields was 98%, but disassembly of components with underfill was less effective. Both simulation and actual measurement results of the equipment’s thermal field showed that the temperature inside the disassembly bin was uniform, with a maximum temperature difference of 6–8 °C. The area of the low-temperature region accounted for approximately 5% of the total area. The acceleration ranged from 2.11 to 8.28 g when using the disassembly force model. This equipment and process can be applied to disassemble large quantities of WPCBs.Keywords
Funding Information
- National Key R&D Program of China (2018YFC1902303)
- Gaoyuan Discipline of Shanghai e Environmental Science and Engineering (Resource Recycling Science and Engineering) (2018YFC1902303)
This publication has 31 references indexed in Scilit:
- A novel dismantling process of waste printed circuit boards using water-soluble ionic liquidChemosphere, 2013
- Disassembly and physical separation of electric/electronic components layered in printed circuit boards (PCB)Journal of Hazardous Materials, 2012
- Thiourea leaching gold and silver from the printed circuit boards of waste mobile phonesWaste Management, 2012
- Using vacuum pyrolysis and mechanical processing for recycling waste printed circuit boardsJournal of Hazardous Materials, 2010
- Column bioleaching of metals from electronic scrapHydrometallurgy, 2010
- A new technology for recycling materials from waste printed circuit boardsJournal of Hazardous Materials, 2010
- The Electronics Revolution: From E-Wonderland to E-WastelandScience, 2009
- Confronting a Toxic Blowback From the Electronics TradeScience, 2009
- Removal force models for component disassembly from waste printed circuit boardResources, Conservation and Recycling, 2009
- Recycling of waste printed circuit boards: A review of current technologies and treatment status in ChinaJournal of Hazardous Materials, 2009