Characterization and Luminescence Properties of YAG : Ce 3+ Phosphors by Molten Salt Synthesis

Authors:

Abstract
The Y 2.9 Ce 0.1 Al 5 O 12 ( YAG : Ce 3+ ) phosphors were successfully prepared via molten salt synthesis ( MSS ) method using the eutectic mixtures of NaNO 2 –KNO 2 or NaCl–KCl as the flux. Using NaCl–KCl as the flux, Y 3 Al 5 O 12 phase is formed above 1000°C, and the as‐prepared YAG : Ce 3+ phosphor with 2 μm average particle size has good emission and excitation spectra. Using NaNO 2 –KNO 2 as the flux, Y 3 Al 5 O 12 phase can be formed at a temperature as low as 400°C, but the as‐prepared YAG : Ce 3+ phosphor with 200 nm average particle size do not have obvious emission and excitation spectra, and after being annealed at 1100°C, the powder also has 200 nm average particle size but has stronger emission and excitation spectra. Compared with the commercial YAG : Ce 3+ phosphor, the emission intensity of the phosphor prepared by MSS using NaNO 2 –KNO 2 as the flux followed by calcination is a little low, but the latter has a smaller particle size, which will reduce the amount of phosphors utilized in white light‐emitting diodes.

This publication has 11 references indexed in Scilit: