Nonlinear static modeling of a tip-tilt-piston micropositioning stage comprising leaf-spring flexure hinges
- 30 January 2020
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 234 (10) , 1969-1978
Abstract
Nonlinear static modeling is crucial for the design of stages with large travel ranges. However, few studies have investigated complex spatial compliant mechanisms. The present study proposes an optimization algorithm based on substructure constraint conditions to formulate the nonlinearity of the force–displacement characteristic of a tip-tilt-piston stage comprising leaf-spring flexure hinges. First, the nonlinear force–displacement characteristics of the compound basic parallelogram mechanism are derived using an optimization algorithm based on two constraint conditions (I and II). Second, the nonlinear static modeling of the tip-tilt-piston stage is conducted based on the modeling results of the compound basic parallelogram mechanism. The stage is divided into three parts, and force analyses are conducted for all three parts. The vertical displacement of the compound basic parallelogram mechanism in part 1 and the rotational angle of the rotational plate in part 2 are calculated. Subsequently, the force–displacement characteristics of the tip-tilt-piston stage are obtained based on a third constraint condition (III). A comparison of the finite element analysis results and the theoretical calculation indicates less than 4% errors. In the experimental tests conducted on the proposed stage and four compound basic parallelogram mechanisms, the displacements were evidently larger than those calculated using the finite element analysis. Therefore, a weight coefficient of the axial force w is introduced in the theoretical calculation to solve the problem of the large deviations between the experimental results and the finite element analysis results. When w is set to 1, the theoretical results are in good agreement with the finite element analysis results; when w is set to 0.05 for the tip-tilt-piston stage and 0.15 for compound basic parallelogram mechanisms, the theoretical results are consistent with the experimental results (less than 8.5% errors).Keywords
Funding Information
- Science Challenge Project (Grant No. JCKY2016212A506-0105)
This publication has 22 references indexed in Scilit:
- Design and Analysis of a New High Precision Decoupled XY Compact Parallel MicromanipulatorMicromachines, 2017
- A High-Speed Large-Range Tip-Tilt-Piston Micromirror ArrayJournal of Microelectromechanical Systems, 2016
- A structure design method for compliant parallel manipulators with actuation isolationMechanical Sciences, 2016
- Design and development of a new large-stroke XY compliant micropositioning stageProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2016
- Optimal design and experiment of a three-axis out-of-plane nano positioning stage using a new compact bridge-type displacement amplifierReview of Scientific Instruments, 2013
- Development of a Nanoprecision 3-DOF Vertical Positioning System With a Flexure HingeIEEE Transactions on Nanotechnology, 2013
- Dynamic modelling of a flexure-based mechanism for ultra-precision grinding operationPrecision Engineering, 2011
- Design and modeling of a novel 3-DOF precision micro-stageMechatronics, 2009
- Orientation Capability, Error Analysis, and Dimensional Optimization of Two Articulated Tool Heads With Parallel KinematicsJournal of Manufacturing Science and Engineering, 2008
- Investigation of a 3-DOF micro-positioning table for surface grindingInternational Journal of Mechanical Sciences, 2006