Effects of Activator Types on Degradation Mechanisms of Metakaolin Geopolymer Mortars Exposed to High Temperature
- 1 December 2020
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 32 (12) , 04020369
Abstract
In this study, we investigated the degradation process of metakaolin-based geopolymers exposed to high temperatures up to 1,000°C. The changes in mechanical properties, microstructure, and phase assemblage of the samples were studied, and the results demonstrated that at high temperatures the activator type [i.e., (Na/Na) and (Na/K) solution] affected the degradation mechanisms of geopolymer mortars. (Na,K)-based geopolymer specimens demonstrated better thermal resistance at temperatures above 200°C. This was evident from the higher compressive strength, lower porosity, and less cracking tendency of this mixture. Compared to (Na,K)-based geopolymers, more mass loss may result in considerable drying shrinkage of (Na,Na)-based counterparts, which would further lead to the occurrence and development of cracks at . Above 200°C, the degradation of the mechanical properties of geopolymers could be attributed to crack development and degradation of material properties. Furthermore, compared to their (Na-Na)-based counterparts, (Na-K)-based geopolymers achieved improved chemical stability and did not form new crystalline phases above 1,000°C. Moreover, higher temperature exposure (1,000°C) led to significant sintering of geopolymers, forming a dense and homogeneous matrix and, as a result, improved mechanical properties of specimens. Overall, it showed that when specimens were exposed to different high temperatures, the mutual promoted effects between and in geopolymers played a significant role in crack development, sintering, and new crystallization formation in the specimens.
Keywords
This publication has 37 references indexed in Scilit:
- Geopolymers: a new and smart way for a sustainable developmentApplied Clay Science, 2013
- Thermal analysis of geopolymer pastes synthesised from five fly ashes of variable compositionJournal of Non-Crystalline Solids, 2012
- Damage behavior of geopolymer composites exposed to elevated temperaturesCement and Concrete Composites, 2008
- Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperaturesCement and Concrete Research, 2007
- Geopolymerisation: A review and prospects for the minerals industryMinerals Engineering, 2007
- Effect of Curing Temperature and Silicate Concentration on Fly-Ash-Based GeopolymerizationIndustrial & Engineering Chemistry Research, 2006
- Synthesis and thermal behaviour of potassium sialate geopolymersMaterials Letters, 2003
- Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialateMaterials Research Bulletin, 2003
- Explosive spalling of high-strength concrete columns in fireMagazine of Concrete Research, 2001
- GeopolymersJournal of Thermal Analysis and Calorimetry, 1991