High-Strength Ceramsite Made with Sludge and Low-Quality Fly Ash
- 1 July 2013
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 25 (7) , 851-856
Abstract
Sludge utilization has become the focus of sludge disposal, and this paper presents a study of using sludge, low-quality fly ash, and other raw materials from the Shanghai region to make high-strength ceramsite. The proportions of the mix and the firing conditions suitable to roast the calcined high-strength sludge ceramsite are discussed. The results show that pure sludge materials alone are not suitable for making high-strength ceramsite. High-strength sludge ceramsite was made with a silt–fly ash–waste glass powder of under a firing system with a preheating temperature of 600°C, a warm-up time of 20 min, a calcination temperature of 1,150°C, and a roasting time of 15 min. The high-strength sludge ceramsite provided particle strength of 7.1 MPa, apparent density of , and water absorption of 8.2%. All properties were better than the requirements in the national standards. In addition, the high-strength sludge ceramsite provides important environmental and social benefits due to its consumption of waste and industry by-products such as river sludge and low-quality fly ash.
Keywords
This publication has 8 references indexed in Scilit:
- Concretes and mortars recycled with water treatment sludge and construction and demolition rubbleConstruction and Building Materials, 2009
- Production of lightweight concrete using incinerator bottom ashConstruction and Building Materials, 2008
- The effect of aggregate absorption on pore area at interfacial zone of lightweight concreteConstruction and Building Materials, 2008
- Lightweight aggregate made from sewage sludge and incinerated ashWaste Management, 2006
- The thermal conductivity mechanism of sewage sludge ash lightweight materialsCement and Concrete Research, 2005
- Neapolitan Yellow Tuff as raw material for lightweight aggregates in lightweight structural concrete productionApplied Clay Science, 2005
- Production of expanded-clay aggregate for lightweight concrete from non-selfbloating claysCement and Concrete Composites, 2004
- High-strength lightweight concrete made with scoria aggregate containing mineral admixturesCement and Concrete Research, 2003