Estimating uncertainty in limit state capacities for reinforced concrete frame structures through pushover analysis
Authors:
- Xiaohui YuXYXiaohui Yu
- Dagang LuDLDagang Lu
- Bing LiBLBing Li
- 25 January 2016
- journal article
- research article
- Published by Techno-Press in Earthquakes and Structures
- Vol. 10 (1) , 141-161
Abstract
Estimating uncertainty in limit state capacities for reinforced concrete frame structures through pushover analysis limit state;pushover analysis;RC frame;uncertainty analysis;correlation-reduced Latin hypercube sampling; In seismic fragility and risk analysis, the definition of structural limit state (LS) capacities is of crucial importance. Traditionally, LS capacities are defined according to design code provisions or using deterministic pushover analysis without considering the inherent randomness of structural parameters. To assess the effects of structural randomness on LS capacities, ten structural parameters that include material strengths and gravity loads are considered as random variables, and a probabilistic pushover method based on a correlation-controlled Latin hypercube sampling technique is used to estimate the uncertainties in LS capacities for four typical reinforced concrete frame buildings. A series of ten LSs are identified from the pushover curves based on the design-code-given thresholds and the available damage-controlled criteria. The obtained LS capacities are further represented by a lognormal model with the median $m_C$ and the dispersion ${\beta}_C$. The results show that structural uncertainties have limited influence on $m_C$ for the LSs other than that near collapse. The commonly used assumption of ${\beta}_C$ between 0.25 and 0.30 overestimates the uncertainties in LS capacities for each individual building, but they are suitable for a building group with moderate damages. A low uncertainty as ${\beta}_C=0.1{\sim}0.15$ is adequate for the LSs associated with slight damages of structures, while a large uncertainty as ${\beta}_C=0.40{\sim}0.45$ is suggested for the LSs near collapse.
Keywords
This publication has 26 references indexed in Scilit:
- Seismic vulnerability evaluation of RC moment frame buildings in moderate seismic zonesEarthquake Engineering & Structural Dynamics, 2011
- Effects of eccentric steel bracing systems on seismic fragility curves of mid-rise R/C buildings: A case studyStructural Safety, 2011
- Analytically derived fragility relationships for the modern high‐rise buildings in the UAEThe Structural Design of Tall and Special Buildings, 2010
- Seismic fragilities for non-ductile reinforced concrete frames – Role of aleatoric and epistemic uncertaintiesStructural Safety, 2010
- Incremental dynamic analysis with consideration of modeling uncertaintiesEarthquake Engineering & Structural Dynamics, 2008
- Non‐linear seismic analysis and vulnerability evaluation of a masonry building by means of the SAP2000 V.10 codeEarthquake Engineering & Structural Dynamics, 2007
- Generation of fragility curves for Turkish masonry buildings considering in‐plane failure modesEarthquake Engineering & Structural Dynamics, 2007
- Fragility assessment of building structural systems in Mid‐AmericaEarthquake Engineering & Structural Dynamics, 2007
- The effect of material and ground motion uncertainty on the seismic vulnerability curves of RC structureEngineering Structures, 2006
- Fragility analysis of flat-slab structuresEngineering Structures, 2004