A Finite Element Model for the Prediction of Chip Formation and Surface Morphology in Friction Stir Welding Process
- 22 October 2021
- journal article
- research article
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 144 (4) , 1-21
Abstract
Friction stir welding (FSW) is widely recognized green manufacturing process capable of producing good quality welded joints at a temperature lower than the melting point. However, most of the works are focused on the establishment of the process parameters for a defect-free joint. There is a lack to understand the formation of defects from a physical basis and visualization of the same, which is otherwise difficult to predict by means of simple experiments. The conventional models do not predict chip formation and surface morphology by accounting for the material loss during the process. Hence, a three-dimensional (3D) finite element-based thermomechanical model is developed following coupled Eulerian-Lagrangian (CEL) approach to understand surface morphology by triggering material flow associated with tool–material interaction. In the present quasi-static analysis, the mass scaling factor is explored to make the model computationally feasible by varying the FSW parameter of plunge depth. The simulated results are validated with experimentally measured temperature and surface morphology. In the CEL approach, the material flow out of the workpiece enables the visualization of the chip formation, whereas small deformation predicts the surface quality of the joint.Keywords
This publication has 27 references indexed in Scilit:
- Coupled Eulerian Lagrangian finite element modeling of friction stir welding processesJournal of Materials Processing Technology, 2013
- Investigation of material deformation in multi-pass conventional metal spinningMaterials & Design (1980-2015), 2011
- Bird strike damage analysis in aircraft structures using Abaqus/Explicit and coupled Eulerian Lagrangian approachComposites Science and Technology, 2011
- Friction model for friction stir welding process simulation: Calibrations from welding experimentsInternational Journal of Machine Tools and Manufacture, 2010
- Numerical studies on controlling of process parameters in friction stir weldingJournal of Materials Processing Technology, 2009
- Explicit coupled thermo‐mechanical finite element model of steel solidificationInternational Journal for Numerical Methods in Engineering, 2008
- Comparison of two contact models in the simulation of friction stir welding processJournal of Materials Science, 2008
- Comparison of the implicit and explicit finite element methods using crystal plasticityComputational Materials Science, 2007
- Selective mass scaling for explicit finite element analysesInternational Journal for Numerical Methods in Engineering, 2005
- Applications of implicit and explicit finite element techniques to metal formingJournal of Materials Processing Technology, 1994