Reliability Analysis of Steel SMRF and SCBF Structures Considering the Vertical Component of Near-Fault Ground Motions
- 1 July 2019
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 145 (7)
Abstract
This paper assesses the effects of the vertical component of ground motions on steel structures and evaluates the current seismic design provisions of ASCE 7 on the basis of a structural reliability outlook. Eight special moment-resisting frame (SMRF) and special concentrically braced frame braced frame (SCBF) steel structures were analyzed under two groups of near-fault (i.e., strike slip and reverse fault) ground motions. Detailed methodology for calculating the reliability index ( ) of structural components is explained; is computed for structural component actions including moment and shear in beams, axial load in braces, and axial load and moment in columns. Seismic provisions of ASCE 7 were developed with an intention of achieving target of 1.75 for earthquake-resistant structural members. Results indicated that the implementation of current seismic load combinations, in which a load factor equal to 20% of design level short-period spectral acceleration on structural dead load is used to account for the effects of the vertical component of ground motions, results in for most structural members. Application of structural system drift limits, however, resulted in increased member sizes in SMRFs by which values larger than 1.75 were achieved. It is concluded that current seismic load combinations in ASCE 7 are inadequate to account for the effects of the vertical component of near-fault ground motions. Nevertheless, performance-based design provisions can provide a reasonable and adequate margin of safety against structural member failure.
Keywords
This publication has 20 references indexed in Scilit:
- Vertical Ground Motion Model for PGA, PGV, and Linear Response Spectra Using the NGA‐West2 DatabaseEarthquake Spectra, 2016
- NGA‐West2 DatabaseEarthquake Spectra, 2014
- Effect of Column‐Base Flexibility on the Seismic Response and Safety of Steel Moment‐Resisting FramesEarthquake Spectra, 2013
- Analytical Assessment of the Effect of Vertical Earthquake Motion on RC Bridge PiersJournal of Structural Engineering, 2011
- Effect of Near-Fault Vertical Ground Motions on Seismic Response of Highway OvercrossingsJournal of Bridge Engineering, 2008
- Probabilistic Basis for 2000 SAC Federal Emergency Management Agency Steel Moment Frame GuidelinesJournal of Structural Engineering, 2002
- A PROCEDURE FOR COMBINING VERTICAL AND HORIZONTAL SEISMIC ACTION EFFECTSJournal of Earthquake Engineering, 2001
- Effects of Connection Fractures on SMRF Seismic Drift DemandsJournal of Structural Engineering, 2000
- 1. Characteristics of Free‐Field Vertical Ground Motion during the Northridge EarthquakeEarthquake Spectra, 1995
- Structural Reliability under Incomplete Probability InformationJournal of Engineering Mechanics, 1986