Coordinated Regulation of Bonding Interfacial Structure and Mechanical Properties of Al/Mg Alloy Composite Plates by Electrically Assisted Rolling
Authors:
Open Access
- 3 March 2025
- journal article
- research article
- Published by Elsevier in Chinese Journal of Mechanical Engineering
- Vol. 38 (1) , 1-15
Abstract
Current research on the fabrication of rolled composite plates primarily focuses on processing and bonding mechanisms. Compared with hot-rolling technology, the electrically assisted rolling process has demonstrated excellent performance in interfacial bonding effects. However, the influence of different current loading modes on the interfacial recombination process of composite panels varies significantly. In this study, low-frequency electrically assisted rolling was used in the first pass to pre-bond a composite plate at a low reduction rate of 15%. High-frequency electrically assisted rolling was used during the second pass, and Al/Mg alloy composite plates were obtained. The interfacial microstructure and mechanical properties of the composite plate were coordinated regulation by designing the rolling reduction rate. The results showed the interfacial morphology of the alternating distribution of the melt-diffusion layer, diffusion layer, and the formation of a new Al/Mg bonding interface. At the melt-diffusion interface, the irregular intermetallic compounds (IMCs) and the new Al/Mg bonding interface were alternately distributed, and the IMCs contained the α-Mg, Mg 17 Al 12 , and Mg 2 Al 3 phases. In addition, an extremely high shear strength of 78.26 MPa was achieved. Adhesion of the Mg alloy matrix was observed on the fracture surface of the Al alloy side. The high shear strength was mainly attributed to the formation of a unique interfacial structure and the appearance of a melt-diffusion layer. Compared to the diffusion-reduction interface, the regular rectangular IMCs and the new Al/Mg bonding interface were alternately distributed, and the IMCs consisted of the Mg 17 Al 12 and Mg 2 Al 3 phases. The shear test results showed that the shear strength of the interface reached 68.69 MPa, and a regular distribution of the Mg alloy matrix with dimples and the Al alloy matrix with a necking zone was observed on the fracture surface of the Al side. Tensile strength test results revealed a maximum value of 316.86 MPa for the Al/Mg alloy composite plate. The tensile and interfacial bonding strengths can be synchronously enhanced by coordinating the regulation of the interfacial structure. This study proposes a new electrically assisted rolling technology that is useful for the fabrication of composite plates with excellent mechanical properties.Keywords
Funding Information
- National Natural Science Foundation of China (52075360)
- National Natural Science Foundation of China (52275360)
- National Natural Science Foundation of China (51805359)
This publication has 32 references indexed in Scilit:
- A new model for thermal-mechanical coupled of gradient temperature rolling force based on geometrical unified yield criterionJournal of Manufacturing Processes, 2023
- Interactions between plastic deformation and precipitation in Aluminium alloys: A crystal plasticity modelActa Materialia, 2023
- Development and application of magnesium alloy parts for automotive OEMs: A reviewJournal of Magnesium and Alloys, 2023
- Recent developments in high-pressure die-cast magnesium alloys for automotive and future applicationsJournal of Magnesium and Alloys, 2023
- Strategies for enhancing the room-temperature stretch formability of magnesium alloy sheets: a reviewJournal of Materials Science, 2021
- Effect of temperature and reduction ratio on the interface bonding properties of TC4/304 plates manufactured by EA rollingJournal of Manufacturing Processes, 2021
- EBSD research on the interfacial microstructure of the corrugated Mg/Al laminated materialJournal of Materials Research and Technology, 2020
- A coupled EBSD/TEM study on the interfacial structure of Al/Mg/Al laminatesJournal of Alloys and Compounds, 2019
- Abnormal texture development in magnesium alloy Mg–3Al–1Zn during large strain electroplastic rolling: Effect of pulsed electric currentInternational Journal of Plasticity, 2016
- Vacancy formation energy and size effectsChemical Physics Letters, 2014