Conditioning Process of Electropolished Electrodes by Field Emission Current in Vacuum
Authors:
- 1 August 1985
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electrical Insulation
- Vol. EI-20 (4) , 705-708
Abstract
Results of an experimental investigation of the electrode conditioning process by field emission current in vacuum are presented. Steel, copper, and aluminum electrodes, electrolytically polished, were used. It was found that the optimum value of the emission current, maintained during the process of conditioning electordes, depends on the kind of metal and on the roughness of the electrode surface. If a higher current or one considerably lower than the optimum one is maintained between the electrodes, then the process of deconditioning of electrodes is observed.Keywords
This publication has 1 reference indexed in Scilit:
- Influence of Electropolishing Cu and Al Electrodes on Predischarge Phenomena and Breakdown of Vacuum GapsIEEE Transactions on Electrical Insulation, 1983