Synergistic Strengthening and Conductivity Optimization in Cu–6%Ag–0.5%Cr Alloys Modified by Rare Earth Elements Sm and Pr
Authors:
- Yupeng ZhangYZYupeng Zhang
- Lin ZhangLZLin Zhang
- Daoqi ZhangDZDaoqi Zhang
- Xiao GuoXGXiao Guo
- Jingwen DuJDJingwen Du
- Engang WangEWEngang Wang
Preprint
- 13 April 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
The effects of trace rare-earth (Sm and Pr) additions on the microstructure, precipitation behavior, mechanical properties, and electrical conductivity of Cu–6 %Ag–0.5 %Cr alloys were systematically investigated through solution treatment and aging. The results show that the addition of Cr and RE elements refines the as-cast microstructure and reduces the size of eutectic regions, while promoting the formation of fine Ag-rich precipitates during aging. Rare-earth additions decrease the activation energy for precipitation and increase the fraction of continuous precipitation, resulting in a more uniform nanoscale precipitation structure. In addition, the combined effects of Cr particles and RE additions enhance grain-boundary pinning, leading to refined grains and an increased fraction of low-angle grain boundaries. Mechanical testing shows that optimized heat treatment combined with RE additions improves the strength while maintaining high electrical conductivity; under the optimum condition (900 °C × 4 h solution treatment and 450 °C × 2 h aging), the tensile strength increases from about 255 MPa for the RE-free alloy to about 290 MPa and 310 MPa for the Sm- and Pr-containing alloys, respectively, while the electrical conductivity remains high at about 80–82% IACS. These results demonstrate that trace rare-earth additions, particularly Pr, effectively regulate precipitation behavior and achieve a favorable strength–conductivity balance in Cu–Ag–Cr alloys.Keywords
This publication has 28 references indexed in Scilit:
- Effect of rapid annealing on microstructure and properties of Cu–4 wt.% Ag alloy wireJournal of Materials Research and Technology, 2026
- Enhanced strength of a high‐conductivity Cu‐Cr alloy by Sc additionRare Metals, 2024
- Effect of La addition on Ag-rich phase formation and mechanical properties of Cu-2Ag alloysJournal of Materials Research and Technology, 2022
- Effect of Alloying Elements on the Microstructure and Performance of Cu-6 pctAgIn-SituCompositesMetallurgical and Materials Transactions A, 2020
- Constitutive Model for Hot Deformation of the Cu-Zr-Ce AlloyJournal of Materials Engineering and Performance, 2018
- Influence of Fe addition on microstructure and properties of Cu-Ag compositeMetals and Materials International, 2017
- A general model for thermal and electrical conductivity of binary metallic systemsActa Materialia, 2017
- Application of rare-earth element Y in refining impure copperInternational Journal of Minerals, Metallurgy and Materials, 2015
- Enhanced Strength in Cu-Ag-Zr Alloy by Combination of Cold Working and AgingJournal of Materials Engineering and Performance, 2014
- A Monte Carlo study of the structur and composition of (001) semicoherent interphase boundaries in CuAgAu alloysActa Metallurgica et Materialia, 1991