CHARACTERIZATION OF A Ca-ALGINATE BASED ION-EXCHANGE RESIN AND ITS APPLICATIONS IN LEAD, COPPER, AND ZINC REMOVAL
Authors:
- 31 December 2001
- journal article
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 36 (16) , 3617-3637
Abstract
Characterization of a novel ca-alginate based ion-exchange resin and its application in metal removal were investigated. The metal removal percentages increased from almost 0 to nearly 100% for metal concentrations < 0.1 mmol/L at pH 1.2 to 4, and a plateau was established at pH > 4. The removal percentages were in the following order: Pb2+ > Cu2+ > Zn2+ at pH < 4. Lower initial concentrations and ionic strengths slightly enhanced the removal percentage. The maximum metal removal capacities (q max) were 2.01 and 2.04 mmol/g for lead and copper, respectively, which are much higher than activated carbons and other reported biosorbents. Competitive effects were important for zinc removal, but less significant for lead and copper uptake. Organic chemical leaching from the resin was negligible. The single- and multiple-species metal ions were removed completely within approximately 90 and 130 minutes, respectively. The lead removal became much faster when its concentration was decreased and in the absence of o...Keywords
This publication has 24 references indexed in Scilit:
- Heavy metal uptake capacities of common marine macro algal biomassWater Research, 1999
- Removal and recovery of lead fixed-bed biosorption with immobilized bacterial biomassWater Science & Technology, 1998
- Equilibrium and Kinetic Studies of Copper Ion Uptake by Calcium AlginateEnvironmental Science & Technology, 1997
- Equilibrium and kinetic studies of copper adsorption by activated carbonSeparations Technology, 1996
- Biosorption of lead from aqueous solutions by marine algaeWater Science & Technology, 1996
- A Comparative Study of the Biosorption of Lead(II) Ions to Z. ramigera and R. arrhizusProcess Biochemistry, 1995
- Comparison of Ca-alginate and Immobilized Z. ramigera as Sorbents for Copper(II) RemovalProcess Biochemistry, 1995
- Diffusivity of Cu2+ in calcium alginate gel beadsBiotechnology and Bioengineering, 1993
- Recovery of copper and cobalt by biopolymer gelsBiotechnology and Bioengineering, 1991
- Use of a gel-forming biopolymer directly dispensed into a loop fluidized bed reactor to recover dissolved copperWater Research, 1990