Thermal Spray Coating on Polymeric Composite for De-Icing and Anti-Icing Applications
- 30 April 2021
- journal article
- research article
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 143 (10) , 1-25
Abstract
This paper reports a novel method for fabrication of an electro-thermal heating element, as de-icer or anti-icer, for the polymer-based composites. The plasma spray technique was utilized for the deposition of a Nickel-Chrome-Aluminum-Yttrium (NiCrAlY) coating layer as a heating element on top of the glass/epoxy composite. To improve the adhesion strength and deposition efficiency of the coatings and to protect the composite fibers during grit blasting and spraying, a woven wire stainless steel mesh was added to the composite substrates during the composite fabrication process. Metal mesh will act as an anchor to keep the coating on the surface. Two types of woven wire and two types of NiCrAlY powder with the fine and coarse particle size distributions were used. Good processing parameters for grit blasting and plasma spraying are identified. It is found that the surface modification method applied to the composite substrates prior to the coating process makes a significant improvement in the coating thickness uniformity and deposition efficiency. Several tests were conducted on the coated samples for determination of their mechanical and electrical properties. Using flatwise tensile tests, it is shown that application of proper surface modification method and set of spray parameters could result in improving the coating bonding strength significantly. The electrical and thermal analyses of the coated samples are also performed. It is shown that the coated samples have a high capability in the generation of heat and can be used as a heating element.Keywords
This publication has 20 references indexed in Scilit:
- Deposition of Electrically Conductive Coatings on Castable Polyurethane Elastomers by the Flame Spraying ProcessJournal of Thermal Spray Technology, 2016
- Application of Flame-Sprayed Coatings as Heating Elements for Polymer-Based Composite StructuresJournal of Thermal Spray Technology, 2015
- Effect of flame-sprayed Al–12Si coatings on the failure behaviour of pressurized fibre-reinforced composite tubesPolymer Testing, 2013
- The Effect of CFRP Surface Treatment on the Splat Morphology and Coating Adhesion StrengthJournal of Thermal Spray Technology, 2013
- Cold Spray Coating Deposition Mechanism on the Thermoplastic and Thermosetting Polymer SubstratesJournal of Thermal Spray Technology, 2013
- Effect of Bond Coats on Thermal Shock Resistance of Thermal Barrier Coatings Deposited Onto Polymer Matrix Composites Via Air Plasma Spray ProcessJournal of Thermal Spray Technology, 2013
- A Study on the Deposition of Al2O3 Coatings on Polymer Substrates by a Plasma Spray/Micro-Arc Oxidation Two-Step MethodJournal of Thermal Spray Technology, 2012
- Parametric study of Al and Al2O3 ceramic coatings deposited by air plasma spray onto polymer substrateApplied Surface Science, 2011
- Influence of bond coat on shear adhesion strength of erosion and thermal resistant coating for carbon fiber reinforced thermosetting polyimideSurface and Coatings Technology, 2006
- Arc sprayed erosion-resistant coating for carbon fiber reinforced polymer matrix composite substratesSurface and Coatings Technology, 2006