Study of the Mass Transfer Behavior in a Centrifugal Contactor and Verification of the Solvent Extraction Model for the SX Process Program
- 5 September 2013
- journal article
- research article
- Published by Taylor & Francis in Solvent Extraction and Ion Exchange
- Vol. 31 (6) , 578-589
Abstract
The SX Process program has been developed for modelling of extraction processes in centrifugal contactors where the transfer kinetics is of big importance due to the short hold up time. Apparent distribution ratios are calculated using a stage efficiency which is flow-rate independent. In this work the dependency of the stage efficiency on parameters affecting the extraction transfer rate, such as metal loading, O/A ratio and acidity, has been investigated in single stage centrifugal contactor experiments for extraction of americium(III) into a 0.015 M CyMe4-BTBP/0.25 M DMDOHEMA/octanol system. A model is proposed on how to calculate the stage efficiency and to accurately predict the apparent distribution ratios under the different conditions used.Keywords
This publication has 21 references indexed in Scilit:
- Flow-Sheet Design for an Innovative SANEX Process Using TODGA and SO3-Ph-BTPProcedia Chemistry, 2012
- Impact of partitioning and transmutation on the high level waste managementNuclear Engineering and Design, 2011
- Direct Selective Extraction of Actinides (III) from PUREX Raffinate using a Mixture of CyMe4BTBP and TODGA as 1-cycle SANEX SolventSolvent Extraction and Ion Exchange, 2011
- Demonstration of a SANEX Process in Centrifugal Contactors using the CyMe4‐BTBP Molecule on a Genuine Fuel SolutionSolvent Extraction and Ion Exchange, 2009
- Demonstration of a TODGA based Extraction Process for the Partitioning of Minor Actinides from a PUREX RaffinateSolvent Extraction and Ion Exchange, 2009
- Development of a TODGA based Process for Partitioning of Actinides from a PUREX Raffinate Part I: Batch Extraction Optimization Studies and Stability TestsSolvent Extraction and Ion Exchange, 2007
- Recovery of minor actinides from HLLW using the DIAMEX processRadiochimica Acta, 2005
- Impact limits of partitioning and transmutation scenarios on the radiotoxicity of actinides in radioactive wasteNuclear Future, 2003
- ACTINIDE PARTITIONING FROM HLW IN A CONTINUOUS DIDPA EXTRACTION PROCESS BY MEANS OF CENTRIFUGAL EXTRACTORSSolvent Extraction and Ion Exchange, 1996
- THE TRUEX PROCESS - A PROCESS FOR THE EXTRACTION OF THE TKANSURANIC ELEMENTS EROM NITRIC AC In WASTES UTILIZING MODIFIED PUREX SOLVENT*Solvent Extraction and Ion Exchange, 1985