Experimental and Numerical Study on Strengthening of Steel Members Subjected to Impact Loading Using Ultrahigh Modulus CFRP
Authors:
- 1 December 2016
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 20 (6)
Abstract
Carbon fiber–reinforced polymers (CFRPs) are commonly used for strengthening steel and concrete structures, with different types of CFRP used for strengthening different structural elements. A number of studies have focused on strengthening of steel members using low and normal-modulus CFRP. However, there is a lack of understanding on the use of ultrahigh modulus (UHM) CFRP for strengthening steel structures under impact loading. This paper presents experimental and numerical investigations on the effect of high load rates on the ultimate joint capacity, failure mode, effective bond length, and strain distribution along the bond interface between CFRP and steel plates in double-strap joints. Two methods of capturing strain were used in this program: (1) Image correlation photogrammetry was used for specimens tested under quasi-static tensile load, and (2) foil strain gauges were used for specimens tested under impact tensile loading. UHM CFRP was used to strengthen the joints using epoxy. The res...Keywords
This publication has 23 references indexed in Scilit:
- Finite element modelling of CFRP/steel double strap joints subjected to dynamic tensile loadingsComposite Structures, 2013
- Finite element validation on adhesive joint for composite fuselage modelJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2012
- Experimental investigation of bond characteristics between CFRP fabrics and steel plate joints under impact tensile loadsComposite Structures, 2012
- Mechanical characterization of steel/CFRP double strap joints at elevated temperaturesComposite Structures, 2011
- Predicting low-velocity impact damage on a stiffened composite panelComposites Part A: Applied Science and Manufacturing, 2010
- Experimental study of fatigue crack growth behaviour in adhesively reinforced steel structuresComposite Structures, 2009
- Behaviour under static loading of metallic beams reinforced with a bonded CFRP plateComposite Structures, 2007
- Strengthening a steel bridge with CFRP compositesProceedings of the Institution of Civil Engineers - Structures and Buildings, 2007
- Experimental and finite element analysis of a double strap joint between steel plates and normal modulus CFRPComposite Structures, 2006
- A Fatigue Failure Criterion for Fiber Reinforced MaterialsJournal of Composite Materials, 1973