Surface ammonification of the mutual‐irradiated aramid fibers in 1,4‐dichlorobutane for improving interfacial properties with epoxy resin
Authors:
- 11 February 2017
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 134 (23)
Abstract
The mutual irradiated aramid fibers in 1,4‐dichlorobutane was ammoniated by ammonia/alcohol solution, in an attempt to improve the interfacial properties between aramid fibers and epoxy matrix. Scanning electron microscopy (SEM), X‐ray photoelectron spectroscopy (XPS), dynamic contact angle analysis (DCA), interfacial shear strength (IFSS), and single fiber tensile testing were carried out to investigate the functionalization process of aramid fibers and the interfacial properties of the composites. Experimental results showed that the fiber surface elements content changed obviously as well as the roughness through the radiation and chemical reaction. The surface energy and IFSS of aramid fibers increased distinctly after the ammonification, respectively. The amino groups generated by ammonification enhanced the interfacial adhesion of composites effectively by participating in the epoxy resin curing. Moreover, benefited by the appropriate radiation, the tensile strength of aramid fibers was not affected at all. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 44924.Keywords
Funding Information
- National Natural Science Foundation of China (51173032)
This publication has 40 references indexed in Scilit:
- Deposition of carbon nanotubes onto aramid fibers using as-received and chemically modified fibersApplied Surface Science, 2016
- Surface Modification of Aramid Fibers by Bio-Inspired Poly(dopamine) and Epoxy Functionalized Silane GraftingACS Applied Materials & Interfaces, 2014
- Facile Preparation of Hyperbranched Polysiloxane-Grafted Aramid Fibers with Simultaneously Improved UV Resistance, Surface Activity, and Thermal and Mechanical PropertiesIndustrial & Engineering Chemistry Research, 2014
- Effects of different fluorination routes on aramid fiber surface structures and interlaminar shear strength of its compositesApplied Surface Science, 2013
- The influence of surface microstructure on the scratch characteristics of Kevlar fibersJournal of Materials Science, 2012
- Tow pullout behavior of polymer-coated Kevlar fabricJournal of Materials Science, 2010
- The effect of interphase modification on carbon fiber/polyarylacetylene resin compositesApplied Surface Science, 2008
- Direct fluorination of Twaron fiber and the mechanical, thermal and crystallization behaviour of short Twaron fiber reinforced polypropylene compositesComposites Part A: Applied Science and Manufacturing, 2008
- Properties of syndiotactic polystyrene composites with surface modified short Kevlar fiberMaterials Science and Engineering: A, 2006
- Improvement of mechanical properties of composites through polyamide grafting onto kevlar fibersPolymer Engineering & Science, 1996