Iterative Tracker for Anisotropy-Based Self-Sensing Control of PMSM
Authors:
- 1 September 2019
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Abstract
This paper presents a novel approach to evaluate an anisotropy-based position estimation of Permanent Magnet Synchronous Machines (PMSM) using a Field-Programmable Gate Array (FPGA) and current oversampling. Thus, the slopes of the passive and active switching states of the inverter are calculated. Using the observer as described in previous work, the position of the PMSM is evaluated by comparison of the measured and predicted current slopes. The novel approach in this paper is an iterative tracker to evaluate the adaption law. The tracker improves the transient response of the observer. Additionally, an adjustment procedure for the iterative tracker is introduced, which is based on an analytical description of the observer.Keywords
This publication has 10 references indexed in Scilit:
- Active-Flux-Based Motion-Sensorless Control of PMSM Using Moving Horizon Estimator2018
- Reduced observer for anisotropy-based position estimation of PM synchronous machines using current oversampling2017
- Sensorless control of IPMSM for last 10 years and next 5 yearsCES Transactions on Electrical Machines and Systems, 2017
- Increased signal-to-noise ratio of sensorless control using current oversampling2015
- Novel MRAS approach for online identification of key parameters for self-sensing control of PM synchronous machines2012
- Self-sensing control of PM synchronous machines for the entire speed range with reduced computational effort based on a novel MRAS approach2012
- Investigation of Effectiveness of Sensorless Operation in Carrier-Signal-Injection-Based Sensorless-Control MethodsIEEE Transactions on Industrial Electronics, 2010
- Extended kalman filter tuning in sensorless PMSM drivesIEEE Transactions on Industry Applications, 2003
- Sensorless speed and position control of synchronous machines using alternating carrier injection2003
- Transducerless position and velocity estimation in induction and salient AC machinesIEEE Transactions on Industry Applications, 1995