Vehicle Side Safety Enhancement through Door Intrusion Barrier Analysis and Recuperation
- 9 January 2019
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
The automobile industry is making huge strides to improve vehicle and occupant safety. A lot of safety improvements and modifications have been made in the past decade. But the side impact is still overlooked as not much has been improved for side safety despite most of the accidents and collisions happen to the side of a vehicle. Door intrusion barriers are the primary protection feature along with A, B and C pillars. Crashworthiness mainly depends on the position, cross-section and material of the intrusion barrier. So, our work mainly focuses on finding the optimum position, choosing the correct cross-section and finding the right material for the intrusion barrier. The objective of this project is to minimize the damage to the side of the vehicle by increasing its crashworthiness thereby reducing passenger injuries. A model of a vehicle door has been designed in Solid Works and various cross sections of door intrusion barriers like circular, rectangular, H-section, I section, E and C section have been developed. The crash test has been conducted according to New Car Assessment Program (NCAP) norms and the best possible configuration with highest safety level has been found. The barrier developed successfully reduced deformation by 36.667% and was subjected to a much lesser stress which was 28% lower than the existing barriers.Keywords
This publication has 16 references indexed in Scilit:
- Crash protectiveness to occupant injury and vehicle damage: An investigation on major car brandsAccident Analysis & Prevention, 2016
- Development of a new lumped-parameter model for vehicle side-impact safety simulationProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2008
- Reliability-based design optimization for crashworthiness of vehicle side impactStructural and Multidisciplinary Optimization, 2004
- Mechanically fastened composite side-door impact beams for passenger cars designed for shear-out failure modesComposite Structures, 2002
- Optimization of a car body component subjected to side impactStructural and Multidisciplinary Optimization, 2001
- Optimisation and robustness for crashworthiness of side impactInternational Journal of Vehicle Design, 2001
- The frontal impact response of a spaceframe chassis sportscarProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2000
- Vehicle dynamics simulations with coupled multibody and finite element modelsFinite Elements in Analysis and Design, 1999
- Two-vehicle side impact crashes: The relationship of vehicle and crash characteristics to injury severityAccident Analysis & Prevention, 1997
- Composite side-door impact beams for passenger carsComposite Structures, 1997