Thermo-Mechanical Model and Thermal Analysis of Hollow Cylinder Planetary Roller Screw Mechanism
Authors:
- 4 March 2015
- journal article
- research article
- Published by Taylor & Francis in Mechanics Based Design of Structures and Machines
- Vol. 43 (3) , 359-381
Abstract
Planetary roller screw mechanism (PRSM) is widely used for rapid and precise motion translation from rotary into linear motion due to its high stiffness and high position accuracy. However, a high speed PRSM drive system naturally generates significant amount of frictional heat at the contact interfaces, which causes thermal deformation and thermal error and reduces motion accuracy. Preload is usually applied to remove the axial backlash of the PRSM for achieving high accuracy and great stiffness. However, more frictional heat is produced by such preload. On the other hand, larger numbers of angular contact bearings are needed to support the heavy axial load. The friction heat generated in support bearings has also to be investigated. In order to estimate the thermal distribution and thermal error of the hollow cylinder PRSM, a thermo-mechanical model based on finite element method (FEM) is developed, where heat generation from the two main sources of the PRSM, the parameters calculation of heat transfer coefficient and other thermal boundary conditions were studied. The presented model is proven capable of investigating temperature distribution, thermal error, and cooling performances of coolants of the PRSM system.Keywords
This publication has 14 references indexed in Scilit:
- A Frictional Heat Model of Planetary Roller Screw Mechanism Considering Load DistributionMechanics Based Design of Structures and Machines, 2014
- Stiffness of the Roller Screw Mechanism by the Direct MethodMechanics Based Design of Structures and Machines, 2013
- Kinematics of Roller Migration in the Planetary Roller Screw MechanismJournal of Mechanical Design, 2012
- Temperature model of ball screw and its thermal error prediction under single heatOptics and Precision Engineering, 2012
- Heat generation modeling of ball bearing based on internal load distributionTribology International, 2012
- A Review of More-Electric AircraftInternational Conference on Aerospace Sciences and Aviation Technology, 2009
- Intelligent Electromechanical Actuators to Modernize Ship OperationsNaval Engineers Journal, 2008
- Thermo-Mechanical Model of Ball Screw With Non-Steady Heat Sources2007
- Hemolysis in an Electromechanical Driven Pulsatile Total Artificial HeartArtificial Organs, 2003
- Real-time estimation of temperature distribution in a ball-screw systemInternational Journal of Machine Tools and Manufacture, 1997