Fatigue Behavior Characteristics of Hybrid Composites with Nonwoven Carbon Tissue
Authors:
- 1 February 2003
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 37 (3) , 253-268
Abstract
Fatigue behavior characteristics of hybrid composites with nonwoven carbon tissue (NWCT) are investigated under tension–tension cyclic loadings. The hybrid composites were made by stacking NWCT-prepreg and CFRP-prepreg. To investigate the fatigue effects of the NWCT stacking, ten kinds of laminates were studied; i.e., NWCT composites, CFRP transverse [90]12, off-axis[45] 12 and angle-ply [±45]3S, hybrid transverse ([90//90//90//90//90//90/]S, [//90//90//90//90//90/]S), off-axis([45//45//45//45//45//45/] S, [//45//45//45//45//45//45/]S) and angle-ply ([+45//−45//+45//−45//+45//−45]S,[//+45//−45//+45//−45//+45//−45]S). The symbol “//” meansthat the NWCT-prepreg islocated between the CFRP layers. The effects of NWCT on the tension–tension fatigue life, the residual strength and stiffness of angle-ply hybrid specimens were evaluated after fatigue tests. The fatigue behaviorsof the hybrid compositeswere dependent on that of the NWCT composites. The fracture surfaces of the hybrid specimens and the fracture process on the side-edge section were observed with an optical microscope, and the failure mechanism was analyzed.Keywords
This publication has 16 references indexed in Scilit:
- Fiber metal laminates: An advanced material for future aircraftJournal of Materials Processing Technology, 1997
- Effect of fiber bridging on the fatigue crack propagation in carbon fiber-reinforced aluminum laminatesMaterials Science and Engineering: A, 1995
- Crack growth and residual strength characteristics of two grades of glass-reinforced aluminium ‘Glare’Composite Structures, 1994
- Mechanical behaviour of carbon and glass hybrid fibre reinforced polyester compositesJournal of Materials Science, 1992
- Inelastic Response of Hybrid Composite LaminatesJournal of Composite Materials, 1992
- Fatigue crack propagation in ARALL® LAMINATES: Measurement of the effect of crack-tip shielding from crack bridgingEngineering Fracture Mechanics, 1989
- Modeling of orthotropic elastic-plastic properties of ARALL laminatesComposites Science and Technology, 1989
- Flight simulation behaviour of aramid reinforced aluminium laminates (ARALL)Engineering Fracture Mechanics, 1984
- Fatigue properties of adhesive-bonded laminated sheet material of aluminum alloysEngineering Fracture Mechanics, 1979
- The Influence of Stacking Sequence on Laminate StrengthJournal of Composite Materials, 1971