Abstract
A study on liquefaction resistance of Solani sand reinforced with geogrid sheet, geosynthetic fiber, and natural coir fiber is reported. Tests were carried out on shake table (vibration table) with sand samples prepared at a relative density of 25%, with and without reinforcements. Synthetic geogrid sheets were used in three different combinations of three, four, and five layers. In case of fibers, the percentage of fibers by weight of dry sand were taken as 0.25, 0.50, and 0.75% and mixed randomly with the sand sample. The liquefaction parameters, such as the maximum pore water pressure (Umax⁡), maximum pore water pressure built-up time, stay time for Umax⁡, and pore water pressure dissipation time were measured corresponding to various levels of accelerations varying from 0.1–0.4 g. The frequency of the dynamic load was kept constant at 5 Hz. The liquefaction resistance of sand was evaluated in terms of maximum pore water pressure ratio (rumax⁡). Test results indicated that on inclusion of fiber...