Investigation on the application of YAG laser texturing technology to the cylinder wall of auto engine
Authors:
- Jian ZhanJZJian Zhan
- Mingjiang YangMYMingjiang Yang
- 8 April 2014
- journal article
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 66 (3) , 387-392
Abstract
Purpose: – The purpose of this study was to develop a new approach using a pulse YAG laser with rational power density and pulse width to texture desired discrete distribution morphology on the cylinder wall. Design/methodology/approach: – Variational rules of the effects of these three parameters were found by calculating the oil film on the cylinder/piston ring system. The experiment results were compared between laser texturing cylinders and conventional honing cylinders. Findings: – It was found that the coefficient of friction and wear rate of laser texturing cylinders were reduced by 50 and 85.7 per cent, respectively, and the piston ring wear rate was decreased by 50 per cent under full lubrication condition. Under starved lubrication condition, the cylinder liner wear was reduced by 34.3 per cent. Originality/value: – The effectiveness of which was determined by three control parameters: depth-to-diameter ratio, area density and distribution angle of the dimples.Keywords
This publication has 9 references indexed in Scilit:
- Study on effect of dimples on friction of parallel surfaces under different sliding conditionsApplied Surface Science, 2010
- Friction and wear of MoS2 films on laser textured steel surfacesSurface and Coatings Technology, 2008
- Experimental Investigation of Partial Laser Surface Texturing for Piston-Ring Friction ReductionTribology Transactions, 2005
- Improving Tribological Performance of Piston Rings by Partial Surface TexturingJournal of Tribology, 2005
- The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contactTribology International, 2005
- The Effect of Laser Texturing of Steel Surfaces and Speed-Load Parameters on the Transition of Lubrication Regime from Boundary to HydrodynamicTribology Transactions, 2004
- Frictional characteristics of mechanical seals with a laser-textured seal faceJournal of Materials Processing Technology, 2002
- Experimental Investigation of Laser Surface Texturing for Reciprocating Automotive ComponentsTribology Transactions, 2002
- Friction-Reducing Surface-Texturing in Reciprocating Automotive ComponentsTribology Transactions, 2001