The Stability Factors’ Sensitivity Analysis of Key Rock B and Its Engineering Application of Gob‐Side Entry Driving in Fully‐Mechanized Caving Faces
Authors:
Open Access
- 1 January 2021
- journal article
- research article
- Published by Wiley in Advances in Civil Engineering
- Vol. 2021 (1)
Abstract
To reveal the critical factors of the main roof influencing stability of surrounding rocks of roadways driven along goaf in fully‐mechanized top‐coal caving faces, this paper builds a structural mechanics model for the surrounding rocks based on geological conditions of the 8105 fully‐mechanized caving face of Yanjiahe Coal Mine, and the stress and equilibrium conditions of the key rock block B are analyzed, and focus is on analyzing rules of the key rock block B influencing stability of roadways driven along goaf. Then, the orthogonal experiment and the range method are used to confirm the sensitivity influencing factors in numerical simulation, which are the basic main roof height and the fracture location, the length of the key rock block B, and the main roof hardness in turn. It is revealed that the basic main roof height and its fracture location have a greater influence on stability of god‐side entry driving. On the one hand, the coal wall and the roof of roadways driven along goaf are damaged, and the deformation of surrounding rocks of roadways and the vertical stress of narrow coal pillars tend to stabilize along with the increase of the basic main roof height. On the other hand, when the gob‐side entry is located below the fracture line of the main roof, the damage caused by gob‐side entry is the most serious. Therefore, on‐site gob‐side entry driving should avoid being below the fracture line of the main roof. At last, industrial tests are successfully conducted in the fully‐mechanized top‐coal caving faces, 8105 and 8215, of Yanjiahe Coal Mine.Keywords
Funding Information
- National Natural Science Foundation of China (51974231)
- National Key Research and Development Program of China (2015CB251600)
This publication has 9 references indexed in Scilit:
- Impact of In Situ Stress Distribution Characteristics on Jointed Surrounding Rock Mass Stability of an Underground Cavern near a Hillslope SurfaceShock and Vibration, 2017
- Stabilization of Gob-Side Entry with an Artificial Side for Sustaining Mining WorkSustainability, 2016
- Flow of top coal and roof rock and loss of top coal in fully mechanized top coal caving mining of extra thick coal seamsArabian Journal of Geosciences, 2016
- An innovative approach for gob-side entry retaining in highly gassy fully-mechanized longwall top-coal cavingInternational Journal of Rock Mechanics and Mining Sciences, 2015
- Roof Deformation, Failure Characteristics, and Preventive Techniques of Gob-Side Entry Driving Heading Adjacent to the Advancing Working FaceRock Mechanics and Rock Engineering, 2015
- Dynamic Effect and Control of Key Strata Break of Immediate Roof in Fully Mechanized Mining with Large Mining HeightShock and Vibration, 2015
- Fabrication of porous CuO nanoplate-films by oxidation-assisted dealloying methodSurface and Coatings Technology, 2014
- Stability and deformation of surrounding rock in pillarless gob-side entry retainingSafety Science, 2012
- Mechanical analysis on deformation of surrounding rock with road-in packing of gob-side entry retaining in fully-mechanized sub-level caving faceJournal of Coal Science and Engineering (China), 2008