Corrosion inhibition efficiency of heavy alkyl benzene derivatives for carbon steel pipelines in 1M HCl
Authors:
- A.M. Al-SabaghAAA.M. Al-Sabagh
- H.M. Abd-El-BaryHAH.M. Abd-El-Bary
- R.A. El-GhazawyRER.A. El-Ghazawy
- M.R. MishrifMMM.R. Mishrif
- B.M. HusseinBHB.M. Hussein
Open Access
- 1 December 2012
- journal article
- Published by Egyptian Petroleum Research Institute in Egyptian Journal of Petroleum
- Vol. 21 (2) , 89-100
Abstract
The corrosion inhibition process of carbon steel in 1M HCl by octadecylbenzene sulfonic acid (H) and their three ester derivatives (H1, H2, and H3) were studied. The esters were quaternized by n-butyl bromide to get (H1Q, H2Q, and H3Q). These products have been investigated as corrosion inhibitors using weight loss and potentiodynamic polarization measurements. From the obtained results it was found that, the inhibition efficiency increases with increasing the inhibitor concentration and the efficiency of the inhibitors were ranked as (H3Q>H2Q>H1Q>H3>H2>H1>H). The adsorption of the inhibitors on the carbon steel surface obeyed the Langmuir’s adsorption isotherm. The effect of temperature on the corrosion behavior in the presence of the inhibitors was studied in the temperature range of 303–333K. The associated activation energy of corrosion and other thermodynamic parameters such as enthalpy (ΔH∗), entropy (ΔS∗) of activation, adsorption equilibrium constant (Kads) and standard free energy of adsorption (Δads0) were calculated to elaborate the corrosion inhibition mechanism. Potentiodynamic polarization studies indicated that, the studied inhibitors are mixed type inhibitorsKeywords
This publication has 41 references indexed in Scilit:
- Surface active properties of chitosan and its derivativesColloids and Surfaces B: Biointerfaces, 2009
- 1-Aminoanthraquinone derivatives as a novel corrosion inhibitor for carbon steel API 5L-X60 in white petrol–water mixturesMaterials Chemistry and Physics, 2009
- Effects of surfactants and their mixtures on inhibition of the corrosion process of ferritic stainless steelElectrochimica Acta, 2009
- Investigation of adsorption and inhibitive effect of 2-mercaptothiazoline on corrosion of mild steel in hydrochloric acid mediaElectrochimica Acta, 2008
- Corrosion inhibition of indole-3-acetic acid on mild steel in 0.5M HClColloids and Surfaces A: Physicochemical and Engineering Aspects, 2008
- Adsorption and corrosion inhibitive properties of 2-amino-5-mercapto-1,3,4-thiadiazole on mild steel in hydrochloric acid mediaColloids and Surfaces A: Physicochemical and Engineering Aspects, 2008
- Inhibitory effect of non-ionic surfactants of the TRITON-X series on the corrosion of carbon steel in sulphuric acidElectrochimica Acta, 2007
- Some Cutting Oil Formulations Based on Local Prepared Emulsifiers Part I: Preparation of Some Emulsifiers Based on Local Raw Materials to Stabilize Cutting Oil EmulsionsJournal of Dispersion Science and Technology, 2006
- Surface activity and light scattering investigation for some novel aromatic polyester amine surfactantsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2004
- Corrosion inhibitor of some surfactants derived from maleic-oleic acid adduct on mild steel in 1 M H2SO4Materials Chemistry and Physics, 2003