Rotary tiller working speed influence on optimal profile knife in the same rotor rotation direction
Authors:
- D. RadomirovićDRD. Radomirović
- O. PonjičanOPO. Ponjičan
- A. SedlarASA. Sedlar
- J. TuranJTJ. Turan
- V. VišackiVVV. Višacki
- 1 January 2016
- journal article
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Savremena poljoprivredna tehnika
- Vol. 42 (4) , 73-84
Abstract
The optimal shape of the knife profile is determined by the value of the working speed of 0.43 to 1.08 m/s. Constructional parameters and parameters of a rotary tiller tillage: the radius of the rotor (R=0.25 m), angular velocity (ω=16,038 s-1 ) and working depth (a=0.1 m). The optimal shape of the knife profile is determined by using the parametric equations of the blade top trajectory and an arbitrary point of the knife profile. On the profile of the knife is defined as the distance r that is base on determines corresponding coordinates X and Y. The first derivative of the function is the tangent of the angle between the tangent to the curve at the selected point Y (X) and the axis X. The value of the angle at the top of the blade (a) to test working speed ranges from 5.24 to 14.41 °. There is almost linear dependence between working speed and changes the anglea. By rotating the coordinate system for value of the angle a gets new uv coordinate system. Between the shapes of optimum profile of the knife in the rotated coordinate system uv differences are minimal. Curve knife profile can be writing by equation of the second and fourth degree.Keywords
Funding Information
- Ministry of Education, Science and Technological Development of the Republic of Serbia (31046)
This publication has 7 references indexed in Scilit:
- Optimal profile of rotary tiller knife for reverse rotor rotation directionSavremena poljoprivredna tehnika, 2015
- Knife setting angle critical value in the case of reverse rotor rotation directionSavremena poljoprivredna tehnika, 2014
- The effects of working parameters and tillage quality on rotary tiller specific work requirementAfrican Journal of Agricultural Research, 2011
- Optimization and evaluation of rotary tiller blades: Computer solution of mathematical relationsSoil and Tillage Research, 2009
- Technical Note: Geometrical Analysis of the Effects of Rotary Tiller Blade Path on the Distribution of Soil Slice SizeApplied Engineering in Agriculture, 2008
- Development of a Rotary Tiller Blade using Three-dimensional Computer GraphicsBiosystems Engineering, 2004
- Mathematical Modeling and Computer-aided Design of Passive Tillage ToolsTransactions of the ASAE, 1995