Effect of post-deposition heat treatment on electrodeposited NiCoCrAlY coatings
Authors:
- 1 February 2017
- journal article
- research article
- Published by SAGE Publications in Surface Engineering
- Vol. 33 (2) , 136-141
Abstract
An electrolytic process was utilised to fabricate NiCoCrAlY coatings, involving deposition of a composite coating consisting of the (Ni,Co) matrix and CrAlY particles, followed by a diffusion heat treatment to convert the composite coating to the desired NiCoCrAlY microstructure. This study focused on the effects of the post-deposition heat-treating conditions (temperature and atmosphere) on the final coating microstructure and composition. The (Ni,Co)–CrAlY composite coatings were heat-treated for 2 h at 1000, 1100 and 1200°C in vacuum and Ar, respectively. Phase constituents and concentrations of the major elements in the coating after heat treatment were examined. Vacuum heat treatment at temperatures ≥1100°C resulted in a significant decrease in Cr content at the coating surface due to Cr evaporation. Heat treatment at 1200°C also caused outward diffusion of Ti from the substrate alloy to the coating layer.Keywords
Funding Information
- Office of Naval Research (N00014-14-1-0341)
- U.S. Department of Energy (DE-FE0007332)
- Office of Naval Research (N00014-14-1-0341)
- U.S. Department of Energy (DE-FE0007332)
This publication has 6 references indexed in Scilit:
- Long Term Coarsening of Ren 80 Ni-Base Superalloy2008
- Electrodeposition of composite coatings containing nanoparticles in a metal depositSurface and Coatings Technology, 2006
- Reaction synthesis of Ni-Al-based particle composite coatingsMetallurgical and Materials Transactions A, 2001
- Progress in coatings for gas turbine airfoilsSurface and Coatings Technology, 1998
- The development of electrodeposits for high‐temperature oxidation/corrosion resistanceJournal of Vacuum Science & Technology A, 1986
- The production of multi-component alloy coatings by particle codepositionTransactions of the IMF, 1985