Seismic reliability of V‐braced frames: Influence of design methodologies
- 20 April 2009
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 38 (14) , 1587-1608
Abstract
According to the most modern trend, performance‐based seismic design is aimed at the evaluation of the seismic structural reliability defined as the mean annual frequency (MAF) of exceeding a threshold level of damage, i.e. a limit state. The methodology for the evaluation of the MAF of exceeding a limit state is herein applied with reference to concentrically ‘V’‐braced steel frames designed according to different criteria. In particular, two design approaches are examined. The first approach corresponds to the provisions suggested by Eurocode 8 (prEN 1998—Eurocode 8: design of structures for earthquake resistance. Part 1: general rules, seismic actions and rules for buildings), while the second approach is based on a rigorous application of capacity design criteria aiming at the control of the failure mode (J. Earthquake Eng. 2008; 12:1246–1266; J. Earthquake Eng. 2008; 12:728–759). The aim of the presented work is to focus on the seismic reliability obtained through these design methodologies. The probabilistic performance evaluation is based on an appropriate combination of probabilistic seismic hazard analysis, probabilistic seismic demand analysis (PSDA) and probabilistic seismic capacity analysis. Regarding PSDA, nonlinear dynamic analyses have been carried out in order to obtain the parameters describing the probability distribution laws of demand, conditioned to given values of the earthquake intensity measure. Copyright © 2009 John Wiley & Sons, Ltd.Keywords
This publication has 9 references indexed in Scilit:
- Plastic Design of Seismic Resistant V-Braced FramesJournal of Earthquake Engineering, 2008
- Failure Mode Control of X-Braced Frames Under Seismic ActionsJournal of Earthquake Engineering, 2008
- Influence of Design Criteria on the Seismic Reliability of X-braced FramesJournal of Earthquake Engineering, 2008
- Structure‐Specific Scalar Intensity Measures for Near‐Source and Ordinary Earthquake Ground MotionsEarthquake Spectra, 2007
- Probabilistic Basis for 2000 SAC Federal Emergency Management Agency Steel Moment Frame GuidelinesJournal of Structural Engineering, 2002
- Inelastic seismic response of steel bracing membersJournal of Constructional Steel Research, 2002
- Incremental dynamic analysisEarthquake Engineering & Structural Dynamics, 2001
- 4. Earthquakes, Records, and Nonlinear ResponsesEarthquake Spectra, 1998
- Post-critical behaviour of ‘K’ braced framesJournal of Constructional Steel Research, 1992