Investigation on preparation, microstructure, and properties of AgTiB2 composite
Authors:
- Xianhui WangXWXianhui Wang
- Guijing LiGLGuijing Li
- Juntao ZouJZJuntao Zou
- Shuhua LiangSLShuhua Liang
- Zhikang FanZFZhikang Fan
- 21 September 2010
- journal article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 45 (12) , 1285-1293
Abstract
AgTiB2 composites with different contents of TiB2 were prepared by high-energy milling and powder metallurgy. The morphology and size of the milled Ag/TiB 2 compound powders were characterized by a scanning electron microscopy and a laser particle analyzer. The effect of sintering temperature and TiB 2 content on the microstructure and properties of AgTiB2 composite was studied. The results show that: (1) with increase of the milling time, the powders become finer and more uniform. Nevertheless, the powders begin to coarsen and agglomerate above a certain milling time. In the range of experiments, the desired powders with a relative uniform size can be obtained at 60 h; (2) the increase in TiB2 content results in serious agglomerations of TiB2 in the AgTiB2 composites; and (3) the Ag—0.25 wt%TiB2 composite has a good combination of properties after sintering at 750° C for 2 h, and the hardness and electrical conductivity are 73.3HV and 17.8 MS m-1, respectively.Keywords
This publication has 8 references indexed in Scilit:
- Selection of optimum parameters to obtain Ag–TiB2composite electrical contactsPowder Metallurgy, 2009
- Microstructure and properties of a silver–erbium oxide alloyJournal of Alloys and Compounds, 2007
- Kinetics and formation mechanisms of the nanocomposite powder Ag–SnO2 prepared by reactive millingMaterials Science and Engineering: A, 2004
- The incorporation of self-propagating, high-temperature synthesis-formed Fe-TiB2 into ferrous meltsMetallurgical and Materials Transactions A, 2002
- Preparation and properties of TiB2 nanoparticle reinforced copper matrix composites by in situ processingMaterials Letters, 2002
- Synthesis and sintering of TiB2 and TiB2–TiC composite under high pressureMaterials Science and Engineering: A, 2000
- Make-and-break erosion of Ag/MeO contact materialsIEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, 1996
- Physical and chemical properties of metal oxide additions to Ag-SnO/sub 2/ contact materials and predictions of electrical performanceIEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, 1994