Effect of the state of distribution of supported Pt nanoparticles on effective Pt utilization in polymer electrolyte fuel cells
- 29 May 2013
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 15 (27) , 11236-11247
Abstract
In polymer electrolyte fuel cells, it is essential to minimize Pt loading, particularly at the cathode, without serious loss of performance. From this point of view, we will report an advanced concept for the design of high performance catalysts and membrane–electrode assemblies (MEAs): first, the evaluation of Pt particle distributions on both the interior and exterior walls of various types of carbon black (CB) particles used as supports with respect to the “effective surface (ES)”; second, control of both size and location of Pt particles by means of a new preparation method (nanocapsule method); and finally, a new evaluation method for the properties of MEAs based on the Pt utilization (UPt), mass activity (MA), and effectiveness of Pt (EfPt), based on the ES concept. The amounts of Pt catalyst particles located in the CB nanopores were directly evaluated using the transmission electron microscopy, scanning electron microscopy and corresponding three-dimensional images. By use of the nanocapsule method and optimization of the ionomer, increased MA and EfPt values for the MEA were achieved. The improvement in the cathode performance can be attributed to the sharp particle-size distribution for Pt and the highly uniform dispersion on the exterior surface of graphitized carbon black (GCB) supports.Keywords
This publication has 48 references indexed in Scilit:
- High durability of Pt/graphitized carbon catalysts for polymer electrolyte fuel cells prepared by the nanocapsule methodJournal of Electroanalytical Chemistry, 2013
- Electrochemical and Raman spectroscopic evaluation of Pt/graphitized carbon black catalyst durability for the start/stop operating condition of polymer electrolyte fuel cellsElectrochimica Acta, 2012
- Degradation Mechanisms of Pt/C Fuel Cell Catalysts under Simulated Start–Stop ConditionsACS Catalysis, 2012
- 3D Imaging of Catalyst Support Corrosion in Polymer Electrolyte Fuel CellsThe Journal of Physical Chemistry C, 2011
- New evaluation method for the effectiveness of platinum/carbon electrocatalysts under operating conditionsElectrochimica Acta, 2010
- Development of nano-electrocatalysts based on carbon nitride supports for the ORR processes in PEM fuel cellsElectrochimica Acta, 2010
- Comparison of different methods for determination of Pt surface site concentrations for supported Pt electrocatalystsElectrochimica Acta, 2010
- Effects of operating potential and temperature on degradation of electrocatalyst layer for PEFCsElectrochimica Acta, 2007
- Temperature Dependence of Oxygen Reduction Activity at Nafion-Coated Bulk Pt and Pt/Carbon Black CatalystsThe Journal of Physical Chemistry B, 2006
- Low platinum loading electrodes for polymer electrolyte fuel cells fabricated using thermoplastic ionomersElectrochimica Acta, 1995