Computational Fluid Dynamics Analysis of a Vehicle Radiator Using Porous Media Approach
Authors:
- 6 May 2020
- journal article
- research article
- Published by Taylor & Francis in Heat Transfer Engineering
- Vol. 42 (11) , 904-916
Abstract
In this study, a cooling radiator developed specifically for unmanned aerial vehicles was analyzed using computational fluid dynamics (CFD). The radiator consisted of turbulator pins (core side) placed between two vertical columns (column side). While the air passes from the core side, the cooling fluid takes place between two streams on the column side. CFD modeling of the radiator, which was developed, prototyped, and tested by Kale Oto Radyatör Co. was performed. Modeling of the turbulators and the fins outside the radiator channels is almost impossible due to the tremendous number of required cells. Therefore, the porous media approach was adopted for the core side. Although there are some studies in the article that used porous medium approach in CFD analyses of vehicle radiators, they are generally restricted to CFD modeling of conceptual designs with no experimental validation, making their results questionable. Radiator tests and CFD results showed very good agreement. The maximum differences between experimental and CFD analyses results were 5.6% for pressure drop, 3.1% for radiator outlet temperature, and 2.9% for heat capacity. Therefore, it was concluded that a proper porous media model can be effectively used for both design and optimization considerations.Keywords
This publication has 30 references indexed in Scilit:
- Analysis of Multilayer Mini- and Microchannel Heat Sinks in Single-Phase Flow Using One- and Two-Equation Porous Media ModelsHeat Transfer Engineering, 2011
- Numerical study of flow patterns of compact plate-fin heat exchangers and generation of design data for offset and wavy finsInternational Journal of Heat and Mass Transfer, 2009
- Heat-transfer enhancement in fin-and-tube heat exchanger with improved fin designApplied Thermal Engineering, 2009
- CFD Simulation of Flow Distribution in the Header of Plate‐Fin Heat ExchangersChemical Engineering & Technology, 2007
- Laminar flow and heat transfer in plate-fin triangular ducts in thermally developing entry regionInternational Journal of Heat and Mass Transfer, 2007
- An analytical study of local thermal equilibrium in porous heat sinks using fin theoryInternational Journal of Heat and Mass Transfer, 2006
- Carbon-foam finned tubes in air–water heat exchangersApplied Thermal Engineering, 2006
- A semi-empirical model for estimating permeability and inertial coefficient of pin-fin heat sinksInternational Journal of Heat and Mass Transfer, 2005
- An experimental and numerical study on heat transfer enhancement for gas heat exchangers fitted with porous mediaInternational Journal of Heat and Mass Transfer, 2004
- Heat transfer and friction characteristics of fin-and-tube heat exchangersInternational Journal of Heat and Mass Transfer, 2000