A kinetic model for the first stage of pygas upgrading
Open Access
- 1 March 2007
- journal article
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Chemical Engineering
- Vol. 24 (1) , 119-133
Abstract
Pyrolysis gasoline - PYGAS - is an intermediate boiling product of naphtha steam cracking with a high octane number and high aromatic/unsaturated contents. Due to stabilization concerns, PYGAS must be hydrotreated in two stages. The first stage uses a mild trickle-bed conversion for removing extremely reactive species (styrene, dienes and olefins) prior to the more severe second stage where sulfured and remaining olefins are hydrogenated in gas phase. This work addresses the reaction network and two-phase kinetic model for the first stage of PYGAS upgrading. Nonlinear estimation was used for model tuning with kinetic data obtained in bench-scale trickle-bed hydrogenation with a commercial Pd/Al2O3 catalyst. On-line sampling experiments were designed to study the influence of variables - temperature and spatial velocity - on the conversion of styrene, dienes and olefinsKeywords
This publication has 9 references indexed in Scilit:
- Flowsheet optimization of a lubricant base oil hydrotreatment processBrazilian Journal of Chemical Engineering, 2004
- Kinetics for hydrocracking based on structural classes: Model development and applicationAIChE Journal, 2001
- Hydrocracking of Polynuclear Aromatic Hydrocarbons. Development of Rate Laws through Inhibition StudiesIndustrial & Engineering Chemistry Research, 1997
- Building useful models of complex reaction systems in petroleum refiningChemical Engineering Science, 1996
- Kinetic study of pyrolysis gasoline hydrogenation over supported palladium catalystApplied Catalysis, 1986
- Upflow reactor for the selective hydrogenation of pyrolysis gasoline a comparative study with respect to downflowApplied Catalysis, 1984
- The Estimation of Parameters in Nonlinear, Implicit ModelsTechnometrics, 1973
- Tests for Transport Limitations in Experimental Catalytic ReactorsIndustrial & Engineering Chemistry Process Design and Development, 1971
- The role of axial dispersion in trickle-flow laboratory reactorsChemical Engineering Science, 1971