Design and Evaluation of a Tidal In-Stream Generator Power Port
Authors:
- 20 February 2013
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Systems Journal
- Vol. 7 (4) , 723-731
Abstract
Oceanic currents and tidal streams are a predictable and vast source of energy. The astronomical nature of the underlying forces causing such streams, results in speed variations that change at certain time intervals. There are different methods for harnessing part of this vast and renewable source of energy; however, regardless of the method used, integrating a large-scale tidal in-stream energy converter into a conventional power system poses many challenges, in particular, in weaker networks. Injection of the captured stream power to a nonstiff network changes the magnitude of the voltage at different times of the day. The impact on the voltage magnitude is commonly most critical if tidal generators and consumers share the same medium voltage feeder, which is a case that seems inevitable especially when considering the electrically remote but energy-rich areas of estuaries, oceanfronts, and natural water channels. This investigation provides designing details of a hybrid power port solution that establishes an independent active and reactive power control, enabling it to regulate the point of common coupling voltage, while transferring variable amounts of captured stream power to a nonstiff grid. To verify the feasibility of the proposed scheme, an example system is designed and tested using a common tidal stream power profile. This investigation is a timely contribution to the emerging field of marine current power generation.Keywords
This publication has 9 references indexed in Scilit:
- Long Term Prediction of Tidal CurrentsIEEE Systems Journal, 2010
- A STATCOM-Control Scheme for Grid Connected Wind Energy System for Power Quality ImprovementIEEE Systems Journal, 2010
- Voltage‐Sourced Converters in Power Systems2010
- Statistical voltage quality assessment method for grids with wind power generationIET Renewable Power Generation, 2010
- STATCOM Impact Study on the Integration of a Large Wind Farm into a Weak Loop Power SystemIEEE Transactions on Energy Conversion, 2008
- Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage DrivesIEEE Transactions on Industrial Electronics, 2007
- Understanding Power Quality Problems1999
- Current control techniques for three-phase voltage-source PWM converters: a surveyIEEE Transactions on Industrial Electronics, 1998
- The Use of Harmonic Distortion to Increase the Output Voltage of a Three-Phase PWM InverterIEEE Transactions on Industry Applications, 1984