Fast magnetic coil controller for cold atom experiments

Authors:
Publisher website
Google Scholar
Abstract
Cold atom experiments utilize magnetic fields, commonly generated by coils, as an essential tool to control and manipulate atomic samples. In these experiments, it is often necessary to rapidly switch the magnetic field between two values. However, typical power supplies have a limited switching time for the current flowing through the coil. We present a control scheme implemented as an electronic circuit that overcomes this limitation. A faster control is achieved by momentarily applying an on-demand high voltage when the control signal variation surpasses the limits that the conventional power supply can follow, allowing a faster current flow into the magnetic coil. In our specific application, a coil with an inductance of 491 μH and a resistance of 0.26 Ω, corresponding to a time constant of ∼1.9 ms, is driven so that its current faithfully follows the control signals from −1 to 1 A. It is capable of completing a full-scale transition in just ∼31 μs, with an effective bandwidth of 15.2 kHz. This corresponds to an improvement by a factor of more than 20 in both bandwidth and switching speed over a conventional power supply. By appropriately selecting the components of the circuit, both the bandwidth and switching time can be tuned to match specific needs within a wide range of inductive and power requirements.
Funding Information
  • Dirección General Asuntos del Personal Académico, Universidad Nacional Autónoma de México (IN105724, IN115523)
  • Secretaría de Ciencia, Humanidades, Tecnología e Innovación, Mèxico (CF-2023-I-72)

This publication has 23 references indexed in Scilit: