Behavior of functionally graded carbon nanotube reinforced composite sandwich beams with pultruded GFRP core under bending effect
Open Access
- 7 March 2024
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 10, 1236266
Abstract
A novel generation of composite sandwich beams with laminated carbon fiber-reinforced polymer skins and pultruded glass fiber-reinforced polymer core materials was examined for their flexural behavior. The strength and failure mechanisms of the composite sandwich beams in flatwise and edgewise configurations were investigated using three-point static bending tests. These sophisticated composite structures must be designed and used in a variety of sectors, and our research provides vital insights into their performance and failure patterns. In comparison to the reference specimens (FGM-1), the carbon nanotube-reinforced specimens’ bending capacity was affected and ranged from −2.5% to 7.75%. The amount of the carbon nanotube addition had a substantial impact on the beams’ application level and load-carrying capacity. Particularly, the application of 0.5 wt% additive in the outermost fiber region of the beams, such as in FGM-4, led to an increase in the bending capacity. However, the stiffness values at the maximum load were decreased by 0.3%–18.6% compared to FGM-1, with the minimum level of the decrease in FGM-4. The experimental results were compared with the theoretical calculations based on the high-order shear deformation theory, which yielded an approximation between 11.99% and 12.98% by applying the Navier’s solution.Keywords
This publication has 70 references indexed in Scilit:
- Effectiveness of melting phenomenon in two phase dusty carbon nanotubes (Nanomaterials) flow of Eyring-Powell fluid: Heat transfer analysisChinese Journal of Physics, 2023
- Effects of stirrup spacing on shear performance of hybrid composite beams produced by pultruded GFRP profile infilled with reinforced concreteArchives of Civil and Mechanical Engineering, 2022
- Reinforcement of structural, optical, electrical, and dielectric characteristics of CMC / PVA based on GNP / ZnO hybrid nanofiller: Nanocomposites materials for energy‐storage applicationsInternational Journal of Energy Research, 2022
- Enhanced adsorption and reduction performance of nitrate by Fe–Pd–Fe3O4 embedded multi-walled carbon nanotubesChemosphere, 2021
- Parents’ Expectations of High Schools in Firearm Violence PreventionJournal of Community Health, 2017
- Nonlinear free vibration of temperature-dependent sandwich beams with carbon nanotube-reinforced face sheetsActa Mechanica, 2016
- A new micromechanics model and effective elastic modulus of nanotube reinforced compositesComputational Materials Science, 2016
- Beam Structures2011
- A comparison of the mechanical properties of fibers spun from different carbon nanotubesCarbon, 2011
- Reinforcing Epoxy Polymer Composites Through Covalent Integration of Functionalized NanotubesAdvanced Functional Materials, 2004